Most visited

Recently visited

Results for

Summary: Constants | Methods | Inherited Methods

CameraMetadata

public abstract class CameraMetadata
extends Object

java.lang.Object
↳	android.hardware.camera2.CameraMetadata<TKey>

Known direct subclasses

CameraCharacteristics, CaptureRequest, CaptureResult

CameraCharacteristics	The properties describing a `CameraDevice`.
CaptureRequest	An immutable package of settings and outputs needed to capture a single image from the camera device.
CaptureResult	The subset of the results of a single image capture from the image sensor.

Known indirect subclasses

TotalCaptureResult

The total assembled results of a single image capture from the image sensor.

The base class for camera controls and information.

This class defines the basic key/value map used for querying for camera characteristics or capture results, and for setting camera request parameters.

All instances of CameraMetadata are immutable. The list of keys with getKeys() never changes, nor do the values returned by any key with #get throughout the lifetime of the object.

See also:

Summary

Constants
`int`	`COLOR_CORRECTION_ABERRATION_MODE_FAST` Aberration correction will not slow down capture rate relative to sensor raw output.
`int`	`COLOR_CORRECTION_ABERRATION_MODE_HIGH_QUALITY` Aberration correction operates at improved quality but the capture rate might be reduced (relative to sensor raw output rate)
`int`	`COLOR_CORRECTION_ABERRATION_MODE_OFF` No aberration correction is applied.
`int`	`COLOR_CORRECTION_MODE_FAST` Color correction processing must not slow down capture rate relative to sensor raw output.
`int`	`COLOR_CORRECTION_MODE_HIGH_QUALITY` Color correction processing operates at improved quality but the capture rate might be reduced (relative to sensor raw output rate) Advanced white balance adjustments above and beyond the specified white balance pipeline may be applied.
`int`	`COLOR_CORRECTION_MODE_TRANSFORM_MATRIX` Use the `android.colorCorrection.transform` matrix and `android.colorCorrection.gains` to do color conversion.
`int`	`CONTROL_AE_ANTIBANDING_MODE_50HZ` The camera device will adjust exposure duration to avoid banding problems with 50Hz illumination sources.
`int`	`CONTROL_AE_ANTIBANDING_MODE_60HZ` The camera device will adjust exposure duration to avoid banding problems with 60Hz illumination sources.
`int`	`CONTROL_AE_ANTIBANDING_MODE_AUTO` The camera device will automatically adapt its antibanding routine to the current illumination condition.
`int`	`CONTROL_AE_ANTIBANDING_MODE_OFF` The camera device will not adjust exposure duration to avoid banding problems.
`int`	`CONTROL_AE_MODE_OFF` The camera device's autoexposure routine is disabled.
`int`	`CONTROL_AE_MODE_ON` The camera device's autoexposure routine is active, with no flash control.
`int`	`CONTROL_AE_MODE_ON_ALWAYS_FLASH` Like ON, except that the camera device also controls the camera's flash unit, always firing it for still captures.
`int`	`CONTROL_AE_MODE_ON_AUTO_FLASH` Like ON, except that the camera device also controls the camera's flash unit, firing it in low-light conditions.
`int`	`CONTROL_AE_MODE_ON_AUTO_FLASH_REDEYE` Like ON_AUTO_FLASH, but with automatic red eye reduction.
`int`	`CONTROL_AE_MODE_ON_EXTERNAL_FLASH` An external flash has been turned on.
`int`	`CONTROL_AE_PRECAPTURE_TRIGGER_CANCEL` The camera device will cancel any currently active or completed precapture metering sequence, the auto-exposure routine will return to its initial state.
`int`	`CONTROL_AE_PRECAPTURE_TRIGGER_IDLE` The trigger is idle.
`int`	`CONTROL_AE_PRECAPTURE_TRIGGER_START` The precapture metering sequence will be started by the camera device.
`int`	`CONTROL_AE_STATE_CONVERGED` AE has a good set of control values for the current scene.
`int`	`CONTROL_AE_STATE_FLASH_REQUIRED` AE has a good set of control values, but flash needs to be fired for good quality still capture.
`int`	`CONTROL_AE_STATE_INACTIVE` AE is off or recently reset.
`int`	`CONTROL_AE_STATE_LOCKED` AE has been locked.
`int`	`CONTROL_AE_STATE_PRECAPTURE` AE has been asked to do a precapture sequence and is currently executing it.
`int`	`CONTROL_AE_STATE_SEARCHING` AE doesn't yet have a good set of control values for the current scene.
`int`	`CONTROL_AF_MODE_AUTO` Basic automatic focus mode.
`int`	`CONTROL_AF_MODE_CONTINUOUS_PICTURE` In this mode, the AF algorithm modifies the lens position continually to attempt to provide a constantly-in-focus image stream.
`int`	`CONTROL_AF_MODE_CONTINUOUS_VIDEO` In this mode, the AF algorithm modifies the lens position continually to attempt to provide a constantly-in-focus image stream.
`int`	`CONTROL_AF_MODE_EDOF` Extended depth of field (digital focus) mode.
`int`	`CONTROL_AF_MODE_MACRO` Close-up focusing mode.
`int`	`CONTROL_AF_MODE_OFF` The auto-focus routine does not control the lens; `android.lens.focusDistance` is controlled by the application.
`int`	`CONTROL_AF_SCENE_CHANGE_DETECTED` Scene change is detected within the AF region(s).
`int`	`CONTROL_AF_SCENE_CHANGE_NOT_DETECTED` Scene change is not detected within the AF region(s).
`int`	`CONTROL_AF_STATE_ACTIVE_SCAN` AF is performing an AF scan because it was triggered by AF trigger.
`int`	`CONTROL_AF_STATE_FOCUSED_LOCKED` AF believes it is focused correctly and has locked focus.
`int`	`CONTROL_AF_STATE_INACTIVE` AF is off or has not yet tried to scan/been asked to scan.
`int`	`CONTROL_AF_STATE_NOT_FOCUSED_LOCKED` AF has failed to focus successfully and has locked focus.
`int`	`CONTROL_AF_STATE_PASSIVE_FOCUSED` AF currently believes it is in focus, but may restart scanning at any time.
`int`	`CONTROL_AF_STATE_PASSIVE_SCAN` AF is currently performing an AF scan initiated the camera device in a continuous autofocus mode.
`int`	`CONTROL_AF_STATE_PASSIVE_UNFOCUSED` AF finished a passive scan without finding focus, and may restart scanning at any time.
`int`	`CONTROL_AF_TRIGGER_CANCEL` Autofocus will return to its initial state, and cancel any currently active trigger.
`int`	`CONTROL_AF_TRIGGER_IDLE` The trigger is idle.
`int`	`CONTROL_AF_TRIGGER_START` Autofocus will trigger now.
`int`	`CONTROL_AWB_MODE_AUTO` The camera device's auto-white balance routine is active.
`int`	`CONTROL_AWB_MODE_CLOUDY_DAYLIGHT` The camera device's auto-white balance routine is disabled; the camera device uses cloudy daylight light as the assumed scene illumination for white balance.
`int`	`CONTROL_AWB_MODE_DAYLIGHT` The camera device's auto-white balance routine is disabled; the camera device uses daylight light as the assumed scene illumination for white balance.
`int`	`CONTROL_AWB_MODE_FLUORESCENT` The camera device's auto-white balance routine is disabled; the camera device uses fluorescent light as the assumed scene illumination for white balance.
`int`	`CONTROL_AWB_MODE_INCANDESCENT` The camera device's auto-white balance routine is disabled; the camera device uses incandescent light as the assumed scene illumination for white balance.
`int`	`CONTROL_AWB_MODE_OFF` The camera device's auto-white balance routine is disabled.
`int`	`CONTROL_AWB_MODE_SHADE` The camera device's auto-white balance routine is disabled; the camera device uses shade light as the assumed scene illumination for white balance.
`int`	`CONTROL_AWB_MODE_TWILIGHT` The camera device's auto-white balance routine is disabled; the camera device uses twilight light as the assumed scene illumination for white balance.
`int`	`CONTROL_AWB_MODE_WARM_FLUORESCENT` The camera device's auto-white balance routine is disabled; the camera device uses warm fluorescent light as the assumed scene illumination for white balance.
`int`	`CONTROL_AWB_STATE_CONVERGED` AWB has a good set of control values for the current scene.
`int`	`CONTROL_AWB_STATE_INACTIVE` AWB is not in auto mode, or has not yet started metering.
`int`	`CONTROL_AWB_STATE_LOCKED` AWB has been locked.
`int`	`CONTROL_AWB_STATE_SEARCHING` AWB doesn't yet have a good set of control values for the current scene.
`int`	`CONTROL_CAPTURE_INTENT_CUSTOM` The goal of this request doesn't fall into the other categories.
`int`	`CONTROL_CAPTURE_INTENT_MANUAL` This request is for manual capture use case where the applications want to directly control the capture parameters.
`int`	`CONTROL_CAPTURE_INTENT_MOTION_TRACKING` This request is for a motion tracking use case, where the application will use camera and inertial sensor data to locate and track objects in the world.
`int`	`CONTROL_CAPTURE_INTENT_PREVIEW` This request is for a preview-like use case.
`int`	`CONTROL_CAPTURE_INTENT_STILL_CAPTURE` This request is for a still capture-type use case.
`int`	`CONTROL_CAPTURE_INTENT_VIDEO_RECORD` This request is for a video recording use case.
`int`	`CONTROL_CAPTURE_INTENT_VIDEO_SNAPSHOT` This request is for a video snapshot (still image while recording video) use case.
`int`	`CONTROL_CAPTURE_INTENT_ZERO_SHUTTER_LAG` This request is for a ZSL usecase; the application will stream full-resolution images and reprocess one or several later for a final capture.
`int`	`CONTROL_EFFECT_MODE_AQUA` An "aqua" effect where a blue hue is added to the image.
`int`	`CONTROL_EFFECT_MODE_BLACKBOARD` A "blackboard" effect where the image is typically displayed as regions of black, with white or grey details.
`int`	`CONTROL_EFFECT_MODE_MONO` A "monocolor" effect where the image is mapped into a single color.
`int`	`CONTROL_EFFECT_MODE_NEGATIVE` A "photo-negative" effect where the image's colors are inverted.
`int`	`CONTROL_EFFECT_MODE_OFF` No color effect will be applied.
`int`	`CONTROL_EFFECT_MODE_POSTERIZE` A "posterization" effect where the image uses discrete regions of tone rather than a continuous gradient of tones.
`int`	`CONTROL_EFFECT_MODE_SEPIA` A "sepia" effect where the image is mapped into warm gray, red, and brown tones.
`int`	`CONTROL_EFFECT_MODE_SOLARIZE` A "solarisation" effect (Sabattier effect) where the image is wholly or partially reversed in tone.
`int`	`CONTROL_EFFECT_MODE_WHITEBOARD` A "whiteboard" effect where the image is typically displayed as regions of white, with black or grey details.
`int`	`CONTROL_EXTENDED_SCENE_MODE_BOKEH_CONTINUOUS` Bokeh effect must not slow down capture rate relative to sensor raw output, and the effect is applied to all processed streams no larger than the maximum streaming dimension.
`int`	`CONTROL_EXTENDED_SCENE_MODE_BOKEH_STILL_CAPTURE` High quality bokeh mode is enabled for all non-raw streams (including YUV, JPEG, and IMPLEMENTATION_DEFINED) when capture intent is STILL_CAPTURE.
`int`	`CONTROL_EXTENDED_SCENE_MODE_DISABLED` Extended scene mode is disabled.
`int`	`CONTROL_MODE_AUTO` Use settings for each individual 3A routine.
`int`	`CONTROL_MODE_OFF` Full application control of pipeline.
`int`	`CONTROL_MODE_OFF_KEEP_STATE` Same as OFF mode, except that this capture will not be used by camera device background auto-exposure, auto-white balance and auto-focus algorithms (3A) to update their statistics.
`int`	`CONTROL_MODE_USE_EXTENDED_SCENE_MODE` Use a specific extended scene mode.
`int`	`CONTROL_MODE_USE_SCENE_MODE` Use a specific scene mode.
`int`	`CONTROL_SCENE_MODE_ACTION` Optimized for photos of quickly moving objects.
`int`	`CONTROL_SCENE_MODE_BARCODE` Optimized for accurately capturing a photo of barcode for use by camera applications that wish to read the barcode value.
`int`	`CONTROL_SCENE_MODE_BEACH` Optimized for bright, outdoor beach settings.
`int`	`CONTROL_SCENE_MODE_CANDLELIGHT` Optimized for dim settings where the main light source is a candle.
`int`	`CONTROL_SCENE_MODE_DISABLED` Indicates that no scene modes are set for a given capture request.
`int`	`CONTROL_SCENE_MODE_FACE_PRIORITY` If face detection support exists, use face detection data for auto-focus, auto-white balance, and auto-exposure routines.
`int`	`CONTROL_SCENE_MODE_FIREWORKS` Optimized for nighttime photos of fireworks.
`int`	`CONTROL_SCENE_MODE_HDR` Turn on a device-specific high dynamic range (HDR) mode.
`int`	`CONTROL_SCENE_MODE_HIGH_SPEED_VIDEO` This constant is deprecated. Please refer to this API documentation to find the alternatives
`int`	`CONTROL_SCENE_MODE_LANDSCAPE` Optimized for photos of distant macroscopic objects.
`int`	`CONTROL_SCENE_MODE_NIGHT` Optimized for low-light settings.
`int`	`CONTROL_SCENE_MODE_NIGHT_PORTRAIT` Optimized for still photos of people in low-light settings.
`int`	`CONTROL_SCENE_MODE_PARTY` Optimized for dim, indoor settings with multiple moving people.
`int`	`CONTROL_SCENE_MODE_PORTRAIT` Optimized for still photos of people.
`int`	`CONTROL_SCENE_MODE_SNOW` Optimized for bright, outdoor settings containing snow.
`int`	`CONTROL_SCENE_MODE_SPORTS` Optimized for photos of quickly moving people.
`int`	`CONTROL_SCENE_MODE_STEADYPHOTO` Optimized to avoid blurry photos due to small amounts of device motion (for example: due to hand shake).
`int`	`CONTROL_SCENE_MODE_SUNSET` Optimized for scenes of the setting sun.
`int`	`CONTROL_SCENE_MODE_THEATRE` Optimized for dim, indoor settings where flash must remain off.
`int`	`CONTROL_VIDEO_STABILIZATION_MODE_OFF` Video stabilization is disabled.
`int`	`CONTROL_VIDEO_STABILIZATION_MODE_ON` Video stabilization is enabled.
`int`	`DISTORTION_CORRECTION_MODE_FAST` Lens distortion correction is applied without reducing frame rate relative to sensor output.
`int`	`DISTORTION_CORRECTION_MODE_HIGH_QUALITY` High-quality distortion correction is applied, at the cost of possibly reduced frame rate relative to sensor output.
`int`	`DISTORTION_CORRECTION_MODE_OFF` No distortion correction is applied.
`int`	`EDGE_MODE_FAST` Apply edge enhancement at a quality level that does not slow down frame rate relative to sensor output.
`int`	`EDGE_MODE_HIGH_QUALITY` Apply high-quality edge enhancement, at a cost of possibly reduced output frame rate.
`int`	`EDGE_MODE_OFF` No edge enhancement is applied.
`int`	`EDGE_MODE_ZERO_SHUTTER_LAG` Edge enhancement is applied at different levels for different output streams, based on resolution.
`int`	`FLASH_MODE_OFF` Do not fire the flash for this capture.
`int`	`FLASH_MODE_SINGLE` If the flash is available and charged, fire flash for this capture.
`int`	`FLASH_MODE_TORCH` Transition flash to continuously on.
`int`	`FLASH_STATE_CHARGING` Flash is charging and cannot be fired.
`int`	`FLASH_STATE_FIRED` Flash fired for this capture.
`int`	`FLASH_STATE_PARTIAL` Flash partially illuminated this frame.
`int`	`FLASH_STATE_READY` Flash is ready to fire.
`int`	`FLASH_STATE_UNAVAILABLE` No flash on camera.
`int`	`HOT_PIXEL_MODE_FAST` Hot pixel correction is applied, without reducing frame rate relative to sensor raw output.
`int`	`HOT_PIXEL_MODE_HIGH_QUALITY` High-quality hot pixel correction is applied, at a cost of possibly reduced frame rate relative to sensor raw output.
`int`	`HOT_PIXEL_MODE_OFF` No hot pixel correction is applied.
`int`	`INFO_SUPPORTED_HARDWARE_LEVEL_3` This camera device is capable of YUV reprocessing and RAW data capture, in addition to FULL-level capabilities.
`int`	`INFO_SUPPORTED_HARDWARE_LEVEL_EXTERNAL` This camera device is backed by an external camera connected to this Android device.
`int`	`INFO_SUPPORTED_HARDWARE_LEVEL_FULL` This camera device is capable of supporting advanced imaging applications.
`int`	`INFO_SUPPORTED_HARDWARE_LEVEL_LEGACY` This camera device is running in backward compatibility mode.
`int`	`INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED` This camera device does not have enough capabilities to qualify as a `FULL` device or better.
`int`	`LENS_FACING_BACK` The camera device faces the opposite direction as the device's screen.
`int`	`LENS_FACING_EXTERNAL` The camera device is an external camera, and has no fixed facing relative to the device's screen.
`int`	`LENS_FACING_FRONT` The camera device faces the same direction as the device's screen.
`int`	`LENS_INFO_FOCUS_DISTANCE_CALIBRATION_APPROXIMATE` The lens focus distance is measured in diopters.
`int`	`LENS_INFO_FOCUS_DISTANCE_CALIBRATION_CALIBRATED` The lens focus distance is measured in diopters, and is calibrated.
`int`	`LENS_INFO_FOCUS_DISTANCE_CALIBRATION_UNCALIBRATED` The lens focus distance is not accurate, and the units used for `android.lens.focusDistance` do not correspond to any physical units.
`int`	`LENS_OPTICAL_STABILIZATION_MODE_OFF` Optical stabilization is unavailable.
`int`	`LENS_OPTICAL_STABILIZATION_MODE_ON` Optical stabilization is enabled.
`int`	`LENS_POSE_REFERENCE_GYROSCOPE` The value of `android.lens.poseTranslation` is relative to the position of the primary gyroscope of this Android device.
`int`	`LENS_POSE_REFERENCE_PRIMARY_CAMERA` The value of `android.lens.poseTranslation` is relative to the optical center of the largest camera device facing the same direction as this camera.
`int`	`LENS_POSE_REFERENCE_UNDEFINED` The camera device cannot represent the values of `android.lens.poseTranslation` and `android.lens.poseRotation` accurately enough.
`int`	`LENS_STATE_MOVING` One or several of the lens parameters (`android.lens.focalLength`, `android.lens.focusDistance`, `android.lens.filterDensity` or `android.lens.aperture`) is currently changing.
`int`	`LENS_STATE_STATIONARY` The lens parameters (`android.lens.focalLength`, `android.lens.focusDistance`, `android.lens.filterDensity` and `android.lens.aperture`) are not changing.
`int`	`LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE_APPROXIMATE` A software mechanism is used to synchronize between the physical cameras.
`int`	`LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE_CALIBRATED` The camera device supports frame timestamp synchronization at the hardware level, and the timestamp of a physical stream image accurately reflects its start-of-exposure time.
`int`	`NOISE_REDUCTION_MODE_FAST` Noise reduction is applied without reducing frame rate relative to sensor output.
`int`	`NOISE_REDUCTION_MODE_HIGH_QUALITY` High-quality noise reduction is applied, at the cost of possibly reduced frame rate relative to sensor output.
`int`	`NOISE_REDUCTION_MODE_MINIMAL` MINIMAL noise reduction is applied without reducing frame rate relative to sensor output.
`int`	`NOISE_REDUCTION_MODE_OFF` No noise reduction is applied.
`int`	`NOISE_REDUCTION_MODE_ZERO_SHUTTER_LAG` Noise reduction is applied at different levels for different output streams, based on resolution.
`int`	`REQUEST_AVAILABLE_CAPABILITIES_BACKWARD_COMPATIBLE` The minimal set of capabilities that every camera device (regardless of `android.info.supportedHardwareLevel`) supports.
`int`	`REQUEST_AVAILABLE_CAPABILITIES_BURST_CAPTURE` The camera device supports capturing high-resolution images at >= 20 frames per second, in at least the uncompressed YUV format, when post-processing settings are set to FAST.
`int`	`REQUEST_AVAILABLE_CAPABILITIES_CONSTRAINED_HIGH_SPEED_VIDEO` The device supports constrained high speed video recording (frame rate >=120fps) use case.
`int`	`REQUEST_AVAILABLE_CAPABILITIES_DEPTH_OUTPUT` The camera device can produce depth measurements from its field of view.
`int`	`REQUEST_AVAILABLE_CAPABILITIES_LOGICAL_MULTI_CAMERA` The camera device is a logical camera backed by two or more physical cameras.
`int`	`REQUEST_AVAILABLE_CAPABILITIES_MANUAL_POST_PROCESSING` The camera device post-processing stages can be manually controlled.
`int`	`REQUEST_AVAILABLE_CAPABILITIES_MANUAL_SENSOR` The camera device can be manually controlled (3A algorithms such as auto-exposure, and auto-focus can be bypassed).
`int`	`REQUEST_AVAILABLE_CAPABILITIES_MONOCHROME` The camera device is a monochrome camera that doesn't contain a color filter array, and for YUV_420_888 stream, the pixel values on U and V planes are all 128.
`int`	`REQUEST_AVAILABLE_CAPABILITIES_MOTION_TRACKING` The camera device supports the MOTION_TRACKING value for `android.control.captureIntent`, which limits maximum exposure time to 20 ms.
`int`	`REQUEST_AVAILABLE_CAPABILITIES_OFFLINE_PROCESSING` The camera device supports the OFFLINE_PROCESSING use case.
`int`	`REQUEST_AVAILABLE_CAPABILITIES_PRIVATE_REPROCESSING` The camera device supports the Zero Shutter Lag reprocessing use case.
`int`	`REQUEST_AVAILABLE_CAPABILITIES_RAW` The camera device supports outputting RAW buffers and metadata for interpreting them.
`int`	`REQUEST_AVAILABLE_CAPABILITIES_READ_SENSOR_SETTINGS` The camera device supports accurately reporting the sensor settings for many of the sensor controls while the built-in 3A algorithm is running.
`int`	`REQUEST_AVAILABLE_CAPABILITIES_REMOSAIC_REPROCESSING` The device supports reprocessing from the `RAW_SENSOR` format with a bayer pattern given by `android.sensor.info.binningFactor` (m x n group of pixels with the same color filter) to a remosaiced regular bayer pattern.
`int`	`REQUEST_AVAILABLE_CAPABILITIES_SECURE_IMAGE_DATA` The camera device is capable of writing image data into a region of memory inaccessible to Android userspace or the Android kernel, and only accessible to trusted execution environments (TEE).
`int`	`REQUEST_AVAILABLE_CAPABILITIES_SYSTEM_CAMERA` The camera device is only accessible by Android's system components and privileged applications.
`int`	`REQUEST_AVAILABLE_CAPABILITIES_ULTRA_HIGH_RESOLUTION_SENSOR` This camera device is capable of producing ultra high resolution images in addition to the image sizes described in the `android.scaler.streamConfigurationMap`.
`int`	`REQUEST_AVAILABLE_CAPABILITIES_YUV_REPROCESSING` The camera device supports the YUV_420_888 reprocessing use case, similar as PRIVATE_REPROCESSING, This capability requires the camera device to support the following: One input stream is supported, that is, `android.request.maxNumInputStreams == 1`.
`int`	`SCALER_CROPPING_TYPE_CENTER_ONLY` The camera device only supports centered crop regions.
`int`	`SCALER_CROPPING_TYPE_FREEFORM` The camera device supports arbitrarily chosen crop regions.
`int`	`SCALER_ROTATE_AND_CROP_180` Processed images are rotated by 180 degrees.
`int`	`SCALER_ROTATE_AND_CROP_270` Processed images are rotated by 270 degrees clockwise, and then cropped to the original aspect ratio.
`int`	`SCALER_ROTATE_AND_CROP_90` Processed images are rotated by 90 degrees clockwise, and then cropped to the original aspect ratio.
`int`	`SCALER_ROTATE_AND_CROP_AUTO` The camera API automatically selects the best concrete value for rotate-and-crop based on the application's support for resizability and the current multi-window mode.
`int`	`SCALER_ROTATE_AND_CROP_NONE` No rotate and crop is applied.
`int`	`SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_BGGR`
`int`	`SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_GBRG`
`int`	`SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_GRBG`
`int`	`SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_MONO` Sensor doesn't have any Bayer color filter.
`int`	`SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_NIR` Sensor has a near infrared filter capturing light with wavelength between roughly 750nm and 1400nm, and the same filter covers the whole sensor array.
`int`	`SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_RGB` Sensor is not Bayer; output has 3 16-bit values for each pixel, instead of just 1 16-bit value per pixel.
`int`	`SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_RGGB`
`int`	`SENSOR_INFO_TIMESTAMP_SOURCE_REALTIME` Timestamps from `android.sensor.timestamp` are in the same timebase as `SystemClock.elapsedRealtimeNanos()`, and they can be compared to other timestamps using that base.
`int`	`SENSOR_INFO_TIMESTAMP_SOURCE_UNKNOWN` Timestamps from `android.sensor.timestamp` are in nanoseconds and monotonic, but can not be compared to timestamps from other subsystems (e.g.
`int`	`SENSOR_PIXEL_MODE_DEFAULT` This is the default sensor pixel mode.
`int`	`SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION` This sensor pixel mode is offered by devices with capability `REQUEST_AVAILABLE_CAPABILITIES_ULTRA_HIGH_RESOLUTION_SENSOR`.
`int`	`SENSOR_REFERENCE_ILLUMINANT1_CLOUDY_WEATHER`
`int`	`SENSOR_REFERENCE_ILLUMINANT1_COOL_WHITE_FLUORESCENT` W 3900 - 4500K
`int`	`SENSOR_REFERENCE_ILLUMINANT1_D50`
`int`	`SENSOR_REFERENCE_ILLUMINANT1_D55`
`int`	`SENSOR_REFERENCE_ILLUMINANT1_D65`
`int`	`SENSOR_REFERENCE_ILLUMINANT1_D75`
`int`	`SENSOR_REFERENCE_ILLUMINANT1_DAYLIGHT`
`int`	`SENSOR_REFERENCE_ILLUMINANT1_DAYLIGHT_FLUORESCENT` D 5700 - 7100K
`int`	`SENSOR_REFERENCE_ILLUMINANT1_DAY_WHITE_FLUORESCENT` N 4600 - 5400K
`int`	`SENSOR_REFERENCE_ILLUMINANT1_FINE_WEATHER`
`int`	`SENSOR_REFERENCE_ILLUMINANT1_FLASH`
`int`	`SENSOR_REFERENCE_ILLUMINANT1_FLUORESCENT`
`int`	`SENSOR_REFERENCE_ILLUMINANT1_ISO_STUDIO_TUNGSTEN`
`int`	`SENSOR_REFERENCE_ILLUMINANT1_SHADE`
`int`	`SENSOR_REFERENCE_ILLUMINANT1_STANDARD_A`
`int`	`SENSOR_REFERENCE_ILLUMINANT1_STANDARD_B`
`int`	`SENSOR_REFERENCE_ILLUMINANT1_STANDARD_C`
`int`	`SENSOR_REFERENCE_ILLUMINANT1_TUNGSTEN` Incandescent light
`int`	`SENSOR_REFERENCE_ILLUMINANT1_WHITE_FLUORESCENT` WW 3200 - 3700K
`int`	`SENSOR_TEST_PATTERN_MODE_COLOR_BARS` All pixel data is replaced with an 8-bar color pattern.
`int`	`SENSOR_TEST_PATTERN_MODE_COLOR_BARS_FADE_TO_GRAY` The test pattern is similar to COLOR_BARS, except that each bar should start at its specified color at the top, and fade to gray at the bottom.
`int`	`SENSOR_TEST_PATTERN_MODE_CUSTOM1` The first custom test pattern.
`int`	`SENSOR_TEST_PATTERN_MODE_OFF` No test pattern mode is used, and the camera device returns captures from the image sensor.
`int`	`SENSOR_TEST_PATTERN_MODE_PN9` All pixel data is replaced by a pseudo-random sequence generated from a PN9 512-bit sequence (typically implemented in hardware with a linear feedback shift register).
`int`	`SENSOR_TEST_PATTERN_MODE_SOLID_COLOR` Each pixel in `[R, G_even, G_odd, B]` is replaced by its respective color channel provided in `android.sensor.testPatternData`.
`int`	`SHADING_MODE_FAST` Apply lens shading corrections, without slowing frame rate relative to sensor raw output
`int`	`SHADING_MODE_HIGH_QUALITY` Apply high-quality lens shading correction, at the cost of possibly reduced frame rate.
`int`	`SHADING_MODE_OFF` No lens shading correction is applied.
`int`	`STATISTICS_FACE_DETECT_MODE_FULL` Return all face metadata.
`int`	`STATISTICS_FACE_DETECT_MODE_OFF` Do not include face detection statistics in capture results.
`int`	`STATISTICS_FACE_DETECT_MODE_SIMPLE` Return face rectangle and confidence values only.
`int`	`STATISTICS_LENS_SHADING_MAP_MODE_OFF` Do not include a lens shading map in the capture result.
`int`	`STATISTICS_LENS_SHADING_MAP_MODE_ON` Include a lens shading map in the capture result.
`int`	`STATISTICS_OIS_DATA_MODE_OFF` Do not include OIS data in the capture result.
`int`	`STATISTICS_OIS_DATA_MODE_ON` Include OIS data in the capture result.
`int`	`STATISTICS_SCENE_FLICKER_50HZ` The camera device detects illumination flickering at 50Hz in the current scene.
`int`	`STATISTICS_SCENE_FLICKER_60HZ` The camera device detects illumination flickering at 60Hz in the current scene.
`int`	`STATISTICS_SCENE_FLICKER_NONE` The camera device does not detect any flickering illumination in the current scene.
`int`	`SYNC_MAX_LATENCY_PER_FRAME_CONTROL` Every frame has the requests immediately applied.
`int`	`SYNC_MAX_LATENCY_UNKNOWN` Each new frame has some subset (potentially the entire set) of the past requests applied to the camera settings.
`int`	`TONEMAP_MODE_CONTRAST_CURVE` Use the tone mapping curve specified in the `android.tonemap.curve`* entries.
`int`	`TONEMAP_MODE_FAST` Advanced gamma mapping and color enhancement may be applied, without reducing frame rate compared to raw sensor output.
`int`	`TONEMAP_MODE_GAMMA_VALUE` Use the gamma value specified in `android.tonemap.gamma` to peform tonemapping.
`int`	`TONEMAP_MODE_HIGH_QUALITY` High-quality gamma mapping and color enhancement will be applied, at the cost of possibly reduced frame rate compared to raw sensor output.
`int`	`TONEMAP_MODE_PRESET_CURVE` Use the preset tonemapping curve specified in `android.tonemap.presetCurve` to peform tonemapping.
`int`	`TONEMAP_PRESET_CURVE_REC709` Tonemapping curve is defined by ITU-R BT.709
`int`	`TONEMAP_PRESET_CURVE_SRGB` Tonemapping curve is defined by sRGB

Public methods
`List<TKey>`	`getKeys()` Returns a list of the keys contained in this map.

Inherited methods

From class


        
          java.lang.Object

`Object`	`clone()` Creates and returns a copy of this object.
`boolean`	`equals(Object obj)` Indicates whether some other object is "equal to" this one.
`void`	`finalize()` Called by the garbage collector on an object when garbage collection determines that there are no more references to the object.
`final Class<?>`	`getClass()` Returns the runtime class of this `Object`.
`int`	`hashCode()` Returns a hash code value for the object.
`final void`	`notify()` Wakes up a single thread that is waiting on this object's monitor.
`final void`	`notifyAll()` Wakes up all threads that are waiting on this object's monitor.
`String`	`toString()` Returns a string representation of the object.
`final void`	`wait(long timeout, int nanos)` Causes the current thread to wait until another thread invokes the `notify()` method or the `notifyAll()` method for this object, or some other thread interrupts the current thread, or a certain amount of real time has elapsed.
`final void`	`wait(long timeout)` Causes the current thread to wait until either another thread invokes the `notify()` method or the `notifyAll()` method for this object, or a specified amount of time has elapsed.
`final void`	`wait()` Causes the current thread to wait until another thread invokes the `notify()` method or the `notifyAll()` method for this object.

Constants

COLOR_CORRECTION_ABERRATION_MODE_FAST

public static final int COLOR_CORRECTION_ABERRATION_MODE_FAST

Aberration correction will not slow down capture rate relative to sensor raw output.

See also:

CaptureRequest.COLOR_CORRECTION_ABERRATION_MODE

Constant Value: 1 (0x00000001)

COLOR_CORRECTION_ABERRATION_MODE_HIGH_QUALITY

public static final int COLOR_CORRECTION_ABERRATION_MODE_HIGH_QUALITY

Aberration correction operates at improved quality but the capture rate might be reduced (relative to sensor raw output rate)

See also:

CaptureRequest.COLOR_CORRECTION_ABERRATION_MODE

Constant Value: 2 (0x00000002)

COLOR_CORRECTION_ABERRATION_MODE_OFF

public static final int COLOR_CORRECTION_ABERRATION_MODE_OFF

No aberration correction is applied.

See also:

CaptureRequest.COLOR_CORRECTION_ABERRATION_MODE

Constant Value: 0 (0x00000000)

COLOR_CORRECTION_MODE_FAST

public static final int COLOR_CORRECTION_MODE_FAST

Color correction processing must not slow down capture rate relative to sensor raw output.

Advanced white balance adjustments above and beyond the specified white balance pipeline may be applied.

If AWB is enabled with android.control.awbMode != OFF, then the camera device uses the last frame's AWB values (or defaults if AWB has never been run).

See also:

Constant Value: 1 (0x00000001)

COLOR_CORRECTION_MODE_HIGH_QUALITY

public static final int COLOR_CORRECTION_MODE_HIGH_QUALITY

Color correction processing operates at improved quality but the capture rate might be reduced (relative to sensor raw output rate)

Advanced white balance adjustments above and beyond the specified white balance pipeline may be applied.

If AWB is enabled with android.control.awbMode != OFF, then the camera device uses the last frame's AWB values (or defaults if AWB has never been run).

See also:

Constant Value: 2 (0x00000002)

COLOR_CORRECTION_MODE_TRANSFORM_MATRIX

public static final int COLOR_CORRECTION_MODE_TRANSFORM_MATRIX

Use the android.colorCorrection.transform matrix and android.colorCorrection.gains to do color conversion.

All advanced white balance adjustments (not specified by our white balance pipeline) must be disabled.

If AWB is enabled with android.control.awbMode != OFF, then TRANSFORM_MATRIX is ignored. The camera device will override this value to either FAST or HIGH_QUALITY.

See also:

Constant Value: 0 (0x00000000)

CONTROL_AE_ANTIBANDING_MODE_50HZ

public static final int CONTROL_AE_ANTIBANDING_MODE_50HZ

The camera device will adjust exposure duration to avoid banding problems with 50Hz illumination sources.

See also:

CaptureRequest.CONTROL_AE_ANTIBANDING_MODE

Constant Value: 1 (0x00000001)

CONTROL_AE_ANTIBANDING_MODE_60HZ

public static final int CONTROL_AE_ANTIBANDING_MODE_60HZ

The camera device will adjust exposure duration to avoid banding problems with 60Hz illumination sources.

See also:

CaptureRequest.CONTROL_AE_ANTIBANDING_MODE

Constant Value: 2 (0x00000002)

CONTROL_AE_ANTIBANDING_MODE_AUTO

public static final int CONTROL_AE_ANTIBANDING_MODE_AUTO

The camera device will automatically adapt its antibanding routine to the current illumination condition. This is the default mode if AUTO is available on given camera device.

See also:

CaptureRequest.CONTROL_AE_ANTIBANDING_MODE

Constant Value: 3 (0x00000003)

CONTROL_AE_ANTIBANDING_MODE_OFF

public static final int CONTROL_AE_ANTIBANDING_MODE_OFF

The camera device will not adjust exposure duration to avoid banding problems.

See also:

CaptureRequest.CONTROL_AE_ANTIBANDING_MODE

Constant Value: 0 (0x00000000)

CONTROL_AE_MODE_OFF

public static final int CONTROL_AE_MODE_OFF

The camera device's autoexposure routine is disabled.

The application-selected android.sensor.exposureTime, android.sensor.sensitivity and android.sensor.frameDuration are used by the camera device, along with android.flash.* fields, if there's a flash unit for this camera device.

Note that auto-white balance (AWB) and auto-focus (AF) behavior is device dependent when AE is in OFF mode. To have consistent behavior across different devices, it is recommended to either set AWB and AF to OFF mode or lock AWB and AF before setting AE to OFF. See android.control.awbMode, android.control.afMode, android.control.awbLock, and android.control.afTrigger for more details.

LEGACY devices do not support the OFF mode and will override attempts to use this value to ON.

See also:

Constant Value: 0 (0x00000000)

CONTROL_AE_MODE_ON

public static final int CONTROL_AE_MODE_ON

The camera device's autoexposure routine is active, with no flash control.

The application's values for android.sensor.exposureTime, android.sensor.sensitivity, and android.sensor.frameDuration are ignored. The application has control over the various android.flash.* fields.

See also:

Constant Value: 1 (0x00000001)

CONTROL_AE_MODE_ON_ALWAYS_FLASH

public static final int CONTROL_AE_MODE_ON_ALWAYS_FLASH

Like ON, except that the camera device also controls the camera's flash unit, always firing it for still captures.

The flash may be fired during a precapture sequence (triggered by android.control.aePrecaptureTrigger) and will always be fired for captures for which the android.control.captureIntent field is set to STILL_CAPTURE

See also:

Constant Value: 3 (0x00000003)

CONTROL_AE_MODE_ON_AUTO_FLASH

public static final int CONTROL_AE_MODE_ON_AUTO_FLASH

Like ON, except that the camera device also controls the camera's flash unit, firing it in low-light conditions.

The flash may be fired during a precapture sequence (triggered by android.control.aePrecaptureTrigger) and may be fired for captures for which the android.control.captureIntent field is set to STILL_CAPTURE

See also:

Constant Value: 2 (0x00000002)

CONTROL_AE_MODE_ON_AUTO_FLASH_REDEYE

public static final int CONTROL_AE_MODE_ON_AUTO_FLASH_REDEYE

Like ON_AUTO_FLASH, but with automatic red eye reduction.

If deemed necessary by the camera device, a red eye reduction flash will fire during the precapture sequence.

See also:

CaptureRequest.CONTROL_AE_MODE

Constant Value: 4 (0x00000004)

CONTROL_AE_MODE_ON_EXTERNAL_FLASH

public static final int CONTROL_AE_MODE_ON_EXTERNAL_FLASH

An external flash has been turned on.

It informs the camera device that an external flash has been turned on, and that metering (and continuous focus if active) should be quickly recaculated to account for the external flash. Otherwise, this mode acts like ON.

When the external flash is turned off, AE mode should be changed to one of the other available AE modes.

If the camera device supports AE external flash mode, android.control.aeState must be FLASH_REQUIRED after the camera device finishes AE scan and it's too dark without flash.

See also:

Constant Value: 5 (0x00000005)

CONTROL_AE_PRECAPTURE_TRIGGER_CANCEL

public static final int CONTROL_AE_PRECAPTURE_TRIGGER_CANCEL

The camera device will cancel any currently active or completed precapture metering sequence, the auto-exposure routine will return to its initial state.

See also:

CaptureRequest.CONTROL_AE_PRECAPTURE_TRIGGER

Constant Value: 2 (0x00000002)

CONTROL_AE_PRECAPTURE_TRIGGER_IDLE

public static final int CONTROL_AE_PRECAPTURE_TRIGGER_IDLE

The trigger is idle.

See also:

CaptureRequest.CONTROL_AE_PRECAPTURE_TRIGGER

Constant Value: 0 (0x00000000)

CONTROL_AE_PRECAPTURE_TRIGGER_START

public static final int CONTROL_AE_PRECAPTURE_TRIGGER_START

The precapture metering sequence will be started by the camera device.

The exact effect of the precapture trigger depends on the current AE mode and state.

See also:

CaptureRequest.CONTROL_AE_PRECAPTURE_TRIGGER

Constant Value: 1 (0x00000001)

CONTROL_AE_STATE_CONVERGED

public static final int CONTROL_AE_STATE_CONVERGED

AE has a good set of control values for the current scene.

See also:

CaptureResult.CONTROL_AE_STATE

Constant Value: 2 (0x00000002)

CONTROL_AE_STATE_FLASH_REQUIRED

public static final int CONTROL_AE_STATE_FLASH_REQUIRED

AE has a good set of control values, but flash needs to be fired for good quality still capture.

See also:

CaptureResult.CONTROL_AE_STATE

Constant Value: 4 (0x00000004)

CONTROL_AE_STATE_INACTIVE

public static final int CONTROL_AE_STATE_INACTIVE

AE is off or recently reset.

When a camera device is opened, it starts in this state. This is a transient state, the camera device may skip reporting this state in capture result.

See also:

CaptureResult.CONTROL_AE_STATE

Constant Value: 0 (0x00000000)

CONTROL_AE_STATE_LOCKED

public static final int CONTROL_AE_STATE_LOCKED

AE has been locked.

See also:

CaptureResult.CONTROL_AE_STATE

Constant Value: 3 (0x00000003)

CONTROL_AE_STATE_PRECAPTURE

public static final int CONTROL_AE_STATE_PRECAPTURE

AE has been asked to do a precapture sequence and is currently executing it.

Precapture can be triggered through setting android.control.aePrecaptureTrigger to START. Currently active and completed (if it causes camera device internal AE lock) precapture metering sequence can be canceled through setting android.control.aePrecaptureTrigger to CANCEL.

Once PRECAPTURE completes, AE will transition to CONVERGED or FLASH_REQUIRED as appropriate. This is a transient state, the camera device may skip reporting this state in capture result.

See also:

Constant Value: 5 (0x00000005)

CONTROL_AE_STATE_SEARCHING

public static final int CONTROL_AE_STATE_SEARCHING

AE doesn't yet have a good set of control values for the current scene.

This is a transient state, the camera device may skip reporting this state in capture result.

See also:

CaptureResult.CONTROL_AE_STATE

Constant Value: 1 (0x00000001)

CONTROL_AF_MODE_AUTO

public static final int CONTROL_AF_MODE_AUTO

Basic automatic focus mode.

In this mode, the lens does not move unless the autofocus trigger action is called. When that trigger is activated, AF will transition to ACTIVE_SCAN, then to the outcome of the scan (FOCUSED or NOT_FOCUSED).

Always supported if lens is not fixed focus.

Use android.lens.info.minimumFocusDistance to determine if lens is fixed-focus.

Triggering AF_CANCEL resets the lens position to default, and sets the AF state to INACTIVE.

See also:

Constant Value: 1 (0x00000001)

CONTROL_AF_MODE_CONTINUOUS_PICTURE

public static final int CONTROL_AF_MODE_CONTINUOUS_PICTURE

In this mode, the AF algorithm modifies the lens position continually to attempt to provide a constantly-in-focus image stream.

The focusing behavior should be suitable for still image capture; typically this means focusing as fast as possible. When the AF trigger is not involved, the AF algorithm should start in INACTIVE state, and then transition into PASSIVE_SCAN and PASSIVE_FOCUSED states as appropriate as it attempts to maintain focus. When the AF trigger is activated, the algorithm should finish its PASSIVE_SCAN if active, and then transition into AF_FOCUSED or AF_NOT_FOCUSED as appropriate, and lock the lens position until a cancel AF trigger is received.

When the AF cancel trigger is activated, the algorithm should transition back to INACTIVE and then act as if it has just been started.

See also:

CaptureRequest.CONTROL_AF_MODE

Constant Value: 4 (0x00000004)

CONTROL_AF_MODE_CONTINUOUS_VIDEO

public static final int CONTROL_AF_MODE_CONTINUOUS_VIDEO

In this mode, the AF algorithm modifies the lens position continually to attempt to provide a constantly-in-focus image stream.

The focusing behavior should be suitable for good quality video recording; typically this means slower focus movement and no overshoots. When the AF trigger is not involved, the AF algorithm should start in INACTIVE state, and then transition into PASSIVE_SCAN and PASSIVE_FOCUSED states as appropriate. When the AF trigger is activated, the algorithm should immediately transition into AF_FOCUSED or AF_NOT_FOCUSED as appropriate, and lock the lens position until a cancel AF trigger is received.

Once cancel is received, the algorithm should transition back to INACTIVE and resume passive scan. Note that this behavior is not identical to CONTINUOUS_PICTURE, since an ongoing PASSIVE_SCAN must immediately be canceled.

See also:

CaptureRequest.CONTROL_AF_MODE

Constant Value: 3 (0x00000003)

CONTROL_AF_MODE_EDOF

public static final int CONTROL_AF_MODE_EDOF

Extended depth of field (digital focus) mode.

The camera device will produce images with an extended depth of field automatically; no special focusing operations need to be done before taking a picture.

AF triggers are ignored, and the AF state will always be INACTIVE.

See also:

CaptureRequest.CONTROL_AF_MODE

Constant Value: 5 (0x00000005)

CONTROL_AF_MODE_MACRO

public static final int CONTROL_AF_MODE_MACRO

Close-up focusing mode.

When that trigger is activated, AF will transition to ACTIVE_SCAN, then to the outcome of the scan (FOCUSED or NOT_FOCUSED). Triggering cancel AF resets the lens position to default, and sets the AF state to INACTIVE.

See also:

CaptureRequest.CONTROL_AF_MODE

Constant Value: 2 (0x00000002)

CONTROL_AF_MODE_OFF

public static final int CONTROL_AF_MODE_OFF

The auto-focus routine does not control the lens; android.lens.focusDistance is controlled by the application.

See also:

Constant Value: 0 (0x00000000)

CONTROL_AF_SCENE_CHANGE_DETECTED

public static final int CONTROL_AF_SCENE_CHANGE_DETECTED

Scene change is detected within the AF region(s).

See also:

CaptureResult.CONTROL_AF_SCENE_CHANGE

Constant Value: 1 (0x00000001)

CONTROL_AF_SCENE_CHANGE_NOT_DETECTED

public static final int CONTROL_AF_SCENE_CHANGE_NOT_DETECTED

Scene change is not detected within the AF region(s).

See also:

CaptureResult.CONTROL_AF_SCENE_CHANGE

Constant Value: 0 (0x00000000)

CONTROL_AF_STATE_ACTIVE_SCAN

public static final int CONTROL_AF_STATE_ACTIVE_SCAN

AF is performing an AF scan because it was triggered by AF trigger.

Only used by AUTO or MACRO AF modes. This is a transient state, the camera device may skip reporting this state in capture result.

See also:

CaptureResult.CONTROL_AF_STATE

Constant Value: 3 (0x00000003)

CONTROL_AF_STATE_FOCUSED_LOCKED

public static final int CONTROL_AF_STATE_FOCUSED_LOCKED

AF believes it is focused correctly and has locked focus.

This state is reached only after an explicit START AF trigger has been sent (android.control.afTrigger), when good focus has been obtained.

The lens will remain stationary until the AF mode (android.control.afMode) is changed or a new AF trigger is sent to the camera device (android.control.afTrigger).

See also:

Constant Value: 4 (0x00000004)

CONTROL_AF_STATE_INACTIVE

public static final int CONTROL_AF_STATE_INACTIVE

AF is off or has not yet tried to scan/been asked to scan.

When a camera device is opened, it starts in this state. This is a transient state, the camera device may skip reporting this state in capture result.

See also:

CaptureResult.CONTROL_AF_STATE

Constant Value: 0 (0x00000000)

CONTROL_AF_STATE_NOT_FOCUSED_LOCKED

public static final int CONTROL_AF_STATE_NOT_FOCUSED_LOCKED

AF has failed to focus successfully and has locked focus.

This state is reached only after an explicit START AF trigger has been sent (android.control.afTrigger), when good focus cannot be obtained.

The lens will remain stationary until the AF mode (android.control.afMode) is changed or a new AF trigger is sent to the camera device (android.control.afTrigger).

See also:

Constant Value: 5 (0x00000005)

CONTROL_AF_STATE_PASSIVE_FOCUSED

public static final int CONTROL_AF_STATE_PASSIVE_FOCUSED

AF currently believes it is in focus, but may restart scanning at any time.

Only used by CONTINUOUS_* AF modes. This is a transient state, the camera device may skip reporting this state in capture result.

See also:

CaptureResult.CONTROL_AF_STATE

Constant Value: 2 (0x00000002)

CONTROL_AF_STATE_PASSIVE_SCAN

public static final int CONTROL_AF_STATE_PASSIVE_SCAN

AF is currently performing an AF scan initiated the camera device in a continuous autofocus mode.

Only used by CONTINUOUS_* AF modes. This is a transient state, the camera device may skip reporting this state in capture result.

See also:

CaptureResult.CONTROL_AF_STATE

Constant Value: 1 (0x00000001)

CONTROL_AF_STATE_PASSIVE_UNFOCUSED

public static final int CONTROL_AF_STATE_PASSIVE_UNFOCUSED

AF finished a passive scan without finding focus, and may restart scanning at any time.

Only used by CONTINUOUS_* AF modes. This is a transient state, the camera device may skip reporting this state in capture result.

LEGACY camera devices do not support this state. When a passive scan has finished, it will always go to PASSIVE_FOCUSED.

See also:

CaptureResult.CONTROL_AF_STATE

Constant Value: 6 (0x00000006)

CONTROL_AF_TRIGGER_CANCEL

public static final int CONTROL_AF_TRIGGER_CANCEL

Autofocus will return to its initial state, and cancel any currently active trigger.

See also:

CaptureRequest.CONTROL_AF_TRIGGER

Constant Value: 2 (0x00000002)

CONTROL_AF_TRIGGER_IDLE

public static final int CONTROL_AF_TRIGGER_IDLE

The trigger is idle.

See also:

CaptureRequest.CONTROL_AF_TRIGGER

Constant Value: 0 (0x00000000)

CONTROL_AF_TRIGGER_START

public static final int CONTROL_AF_TRIGGER_START

Autofocus will trigger now.

See also:

CaptureRequest.CONTROL_AF_TRIGGER

Constant Value: 1 (0x00000001)

CONTROL_AWB_MODE_AUTO

public static final int CONTROL_AWB_MODE_AUTO

The camera device's auto-white balance routine is active.

The application's values for android.colorCorrection.transform and android.colorCorrection.gains are ignored. For devices that support the MANUAL_POST_PROCESSING capability, the values used by the camera device for the transform and gains will be available in the capture result for this request.

See also:

Constant Value: 1 (0x00000001)

CONTROL_AWB_MODE_CLOUDY_DAYLIGHT

public static final int CONTROL_AWB_MODE_CLOUDY_DAYLIGHT

The camera device's auto-white balance routine is disabled; the camera device uses cloudy daylight light as the assumed scene illumination for white balance.

See also:

Constant Value: 6 (0x00000006)

CONTROL_AWB_MODE_DAYLIGHT

public static final int CONTROL_AWB_MODE_DAYLIGHT

The camera device's auto-white balance routine is disabled; the camera device uses daylight light as the assumed scene illumination for white balance.

While the exact white balance transforms are up to the camera device, they will approximately match the CIE standard illuminant D65.

See also:

Constant Value: 5 (0x00000005)

CONTROL_AWB_MODE_FLUORESCENT

public static final int CONTROL_AWB_MODE_FLUORESCENT

The camera device's auto-white balance routine is disabled; the camera device uses fluorescent light as the assumed scene illumination for white balance.

While the exact white balance transforms are up to the camera device, they will approximately match the CIE standard illuminant F2.

See also:

Constant Value: 3 (0x00000003)

CONTROL_AWB_MODE_INCANDESCENT

public static final int CONTROL_AWB_MODE_INCANDESCENT

The camera device's auto-white balance routine is disabled; the camera device uses incandescent light as the assumed scene illumination for white balance.

While the exact white balance transforms are up to the camera device, they will approximately match the CIE standard illuminant A.

See also:

Constant Value: 2 (0x00000002)

CONTROL_AWB_MODE_OFF

public static final int CONTROL_AWB_MODE_OFF

The camera device's auto-white balance routine is disabled.

The application-selected color transform matrix (android.colorCorrection.transform) and gains (android.colorCorrection.gains) are used by the camera device for manual white balance control.

See also:

Constant Value: 0 (0x00000000)

CONTROL_AWB_MODE_SHADE

public static final int CONTROL_AWB_MODE_SHADE

The camera device's auto-white balance routine is disabled; the camera device uses shade light as the assumed scene illumination for white balance.

See also:

Constant Value: 8 (0x00000008)

CONTROL_AWB_MODE_TWILIGHT

public static final int CONTROL_AWB_MODE_TWILIGHT

The camera device's auto-white balance routine is disabled; the camera device uses twilight light as the assumed scene illumination for white balance.

See also:

Constant Value: 7 (0x00000007)

CONTROL_AWB_MODE_WARM_FLUORESCENT

public static final int CONTROL_AWB_MODE_WARM_FLUORESCENT

The camera device's auto-white balance routine is disabled; the camera device uses warm fluorescent light as the assumed scene illumination for white balance.

While the exact white balance transforms are up to the camera device, they will approximately match the CIE standard illuminant F4.

See also:

Constant Value: 4 (0x00000004)

CONTROL_AWB_STATE_CONVERGED

public static final int CONTROL_AWB_STATE_CONVERGED

AWB has a good set of control values for the current scene.

See also:

CaptureResult.CONTROL_AWB_STATE

Constant Value: 2 (0x00000002)

CONTROL_AWB_STATE_INACTIVE

public static final int CONTROL_AWB_STATE_INACTIVE

AWB is not in auto mode, or has not yet started metering.

When a camera device is opened, it starts in this state. This is a transient state, the camera device may skip reporting this state in capture result.

See also:

CaptureResult.CONTROL_AWB_STATE

Constant Value: 0 (0x00000000)

CONTROL_AWB_STATE_LOCKED

public static final int CONTROL_AWB_STATE_LOCKED

AWB has been locked.

See also:

CaptureResult.CONTROL_AWB_STATE

Constant Value: 3 (0x00000003)

CONTROL_AWB_STATE_SEARCHING

public static final int CONTROL_AWB_STATE_SEARCHING

AWB doesn't yet have a good set of control values for the current scene.

This is a transient state, the camera device may skip reporting this state in capture result.

See also:

CaptureResult.CONTROL_AWB_STATE

Constant Value: 1 (0x00000001)

CONTROL_CAPTURE_INTENT_CUSTOM

public static final int CONTROL_CAPTURE_INTENT_CUSTOM

The goal of this request doesn't fall into the other categories. The camera device will default to preview-like behavior.

See also:

CaptureRequest.CONTROL_CAPTURE_INTENT

Constant Value: 0 (0x00000000)

CONTROL_CAPTURE_INTENT_MANUAL

public static final int CONTROL_CAPTURE_INTENT_MANUAL

This request is for manual capture use case where the applications want to directly control the capture parameters.

For example, the application may wish to manually control android.sensor.exposureTime, android.sensor.sensitivity, etc.

See also:

Constant Value: 6 (0x00000006)

CONTROL_CAPTURE_INTENT_MOTION_TRACKING

public static final int CONTROL_CAPTURE_INTENT_MOTION_TRACKING

This request is for a motion tracking use case, where the application will use camera and inertial sensor data to locate and track objects in the world.

The camera device auto-exposure routine will limit the exposure time of the camera to no more than 20 milliseconds, to minimize motion blur.

See also:

CaptureRequest.CONTROL_CAPTURE_INTENT

Constant Value: 7 (0x00000007)

CONTROL_CAPTURE_INTENT_PREVIEW

public static final int CONTROL_CAPTURE_INTENT_PREVIEW

This request is for a preview-like use case.

The precapture trigger may be used to start off a metering w/flash sequence.

See also:

CaptureRequest.CONTROL_CAPTURE_INTENT

Constant Value: 1 (0x00000001)

CONTROL_CAPTURE_INTENT_STILL_CAPTURE

public static final int CONTROL_CAPTURE_INTENT_STILL_CAPTURE

This request is for a still capture-type use case.

If the flash unit is under automatic control, it may fire as needed.

See also:

CaptureRequest.CONTROL_CAPTURE_INTENT

Constant Value: 2 (0x00000002)

CONTROL_CAPTURE_INTENT_VIDEO_RECORD

public static final int CONTROL_CAPTURE_INTENT_VIDEO_RECORD

This request is for a video recording use case.

See also:

CaptureRequest.CONTROL_CAPTURE_INTENT

Constant Value: 3 (0x00000003)

CONTROL_CAPTURE_INTENT_VIDEO_SNAPSHOT

public static final int CONTROL_CAPTURE_INTENT_VIDEO_SNAPSHOT

This request is for a video snapshot (still image while recording video) use case.

The camera device should take the highest-quality image possible (given the other settings) without disrupting the frame rate of video recording.

See also:

CaptureRequest.CONTROL_CAPTURE_INTENT

Constant Value: 4 (0x00000004)

CONTROL_CAPTURE_INTENT_ZERO_SHUTTER_LAG

public static final int CONTROL_CAPTURE_INTENT_ZERO_SHUTTER_LAG

This request is for a ZSL usecase; the application will stream full-resolution images and reprocess one or several later for a final capture.

See also:

CaptureRequest.CONTROL_CAPTURE_INTENT

Constant Value: 5 (0x00000005)

CONTROL_EFFECT_MODE_AQUA

public static final int CONTROL_EFFECT_MODE_AQUA

An "aqua" effect where a blue hue is added to the image.

See also:

CaptureRequest.CONTROL_EFFECT_MODE

Constant Value: 8 (0x00000008)

CONTROL_EFFECT_MODE_BLACKBOARD

public static final int CONTROL_EFFECT_MODE_BLACKBOARD

A "blackboard" effect where the image is typically displayed as regions of black, with white or grey details.

See also:

CaptureRequest.CONTROL_EFFECT_MODE

Constant Value: 7 (0x00000007)

CONTROL_EFFECT_MODE_MONO

public static final int CONTROL_EFFECT_MODE_MONO

A "monocolor" effect where the image is mapped into a single color.

This will typically be grayscale.

See also:

CaptureRequest.CONTROL_EFFECT_MODE

Constant Value: 1 (0x00000001)

CONTROL_EFFECT_MODE_NEGATIVE

public static final int CONTROL_EFFECT_MODE_NEGATIVE

A "photo-negative" effect where the image's colors are inverted.

See also:

CaptureRequest.CONTROL_EFFECT_MODE

Constant Value: 2 (0x00000002)

CONTROL_EFFECT_MODE_OFF

public static final int CONTROL_EFFECT_MODE_OFF

No color effect will be applied.

See also:

CaptureRequest.CONTROL_EFFECT_MODE

Constant Value: 0 (0x00000000)

CONTROL_EFFECT_MODE_POSTERIZE

public static final int CONTROL_EFFECT_MODE_POSTERIZE

A "posterization" effect where the image uses discrete regions of tone rather than a continuous gradient of tones.

See also:

CaptureRequest.CONTROL_EFFECT_MODE

Constant Value: 5 (0x00000005)

CONTROL_EFFECT_MODE_SEPIA

public static final int CONTROL_EFFECT_MODE_SEPIA

A "sepia" effect where the image is mapped into warm gray, red, and brown tones.

See also:

CaptureRequest.CONTROL_EFFECT_MODE

Constant Value: 4 (0x00000004)

CONTROL_EFFECT_MODE_SOLARIZE

public static final int CONTROL_EFFECT_MODE_SOLARIZE

A "solarisation" effect (Sabattier effect) where the image is wholly or partially reversed in tone.

See also:

CaptureRequest.CONTROL_EFFECT_MODE

Constant Value: 3 (0x00000003)

CONTROL_EFFECT_MODE_WHITEBOARD

public static final int CONTROL_EFFECT_MODE_WHITEBOARD

A "whiteboard" effect where the image is typically displayed as regions of white, with black or grey details.

See also:

CaptureRequest.CONTROL_EFFECT_MODE

Constant Value: 6 (0x00000006)

CONTROL_EXTENDED_SCENE_MODE_BOKEH_CONTINUOUS

public static final int CONTROL_EXTENDED_SCENE_MODE_BOKEH_CONTINUOUS

Bokeh effect must not slow down capture rate relative to sensor raw output, and the effect is applied to all processed streams no larger than the maximum streaming dimension. This mode should be used if performance and power are a priority, such as video recording.

See also:

CaptureRequest.CONTROL_EXTENDED_SCENE_MODE

Constant Value: 2 (0x00000002)

CONTROL_EXTENDED_SCENE_MODE_BOKEH_STILL_CAPTURE

public static final int CONTROL_EXTENDED_SCENE_MODE_BOKEH_STILL_CAPTURE

High quality bokeh mode is enabled for all non-raw streams (including YUV, JPEG, and IMPLEMENTATION_DEFINED) when capture intent is STILL_CAPTURE. Due to the extra image processing, this mode may introduce additional stall to non-raw streams. This mode should be used in high quality still capture use case.

See also:

CaptureRequest.CONTROL_EXTENDED_SCENE_MODE

Constant Value: 1 (0x00000001)

CONTROL_EXTENDED_SCENE_MODE_DISABLED

public static final int CONTROL_EXTENDED_SCENE_MODE_DISABLED

Extended scene mode is disabled.

See also:

CaptureRequest.CONTROL_EXTENDED_SCENE_MODE

Constant Value: 0 (0x00000000)

CONTROL_MODE_AUTO

public static final int CONTROL_MODE_AUTO

Use settings for each individual 3A routine.

Manual control of capture parameters is disabled. All controls in android.control.* besides sceneMode take effect.

See also:

CaptureRequest.CONTROL_MODE

Constant Value: 1 (0x00000001)

CONTROL_MODE_OFF

public static final int CONTROL_MODE_OFF

Full application control of pipeline.

All control by the device's metering and focusing (3A) routines is disabled, and no other settings in android.control.* have any effect, except that android.control.captureIntent may be used by the camera device to select post-processing values for processing blocks that do not allow for manual control, or are not exposed by the camera API.

However, the camera device's 3A routines may continue to collect statistics and update their internal state so that when control is switched to AUTO mode, good control values can be immediately applied.

See also:

Constant Value: 0 (0x00000000)

CONTROL_MODE_OFF_KEEP_STATE

public static final int CONTROL_MODE_OFF_KEEP_STATE

Same as OFF mode, except that this capture will not be used by camera device background auto-exposure, auto-white balance and auto-focus algorithms (3A) to update their statistics.

Specifically, the 3A routines are locked to the last values set from a request with AUTO, OFF, or USE_SCENE_MODE, and any statistics or state updates collected from manual captures with OFF_KEEP_STATE will be discarded by the camera device.

See also:

CaptureRequest.CONTROL_MODE

Constant Value: 3 (0x00000003)

CONTROL_MODE_USE_EXTENDED_SCENE_MODE

public static final int CONTROL_MODE_USE_EXTENDED_SCENE_MODE

Use a specific extended scene mode.

When extended scene mode is on, the camera device may override certain control parameters, such as targetFpsRange, AE, AWB, and AF modes, to achieve best power and quality tradeoffs. Only the mandatory stream combinations of LIMITED hardware level are guaranteed.

This setting can only be used if extended scene mode is supported (i.e. android.control.availableExtendedSceneModes contains some modes other than DISABLED).

See also:

CaptureRequest.CONTROL_MODE

Constant Value: 4 (0x00000004)

CONTROL_MODE_USE_SCENE_MODE

public static final int CONTROL_MODE_USE_SCENE_MODE

Use a specific scene mode.

Enabling this disables control.aeMode, control.awbMode and control.afMode controls; the camera device will ignore those settings while USE_SCENE_MODE is active (except for FACE_PRIORITY scene mode). Other control entries are still active. This setting can only be used if scene mode is supported (i.e. android.control.availableSceneModes contain some modes other than DISABLED).

For extended scene modes such as BOKEH, please use USE_EXTENDED_SCENE_MODE instead.

See also:

Constant Value: 2 (0x00000002)

CONTROL_SCENE_MODE_ACTION

public static final int CONTROL_SCENE_MODE_ACTION

Optimized for photos of quickly moving objects.

Similar to SPORTS.

See also:

CaptureRequest.CONTROL_SCENE_MODE

Constant Value: 2 (0x00000002)

CONTROL_SCENE_MODE_BARCODE

public static final int CONTROL_SCENE_MODE_BARCODE

Optimized for accurately capturing a photo of barcode for use by camera applications that wish to read the barcode value.

See also:

CaptureRequest.CONTROL_SCENE_MODE

Constant Value: 16 (0x00000010)

CONTROL_SCENE_MODE_BEACH

public static final int CONTROL_SCENE_MODE_BEACH

Optimized for bright, outdoor beach settings.

See also:

CaptureRequest.CONTROL_SCENE_MODE

Constant Value: 8 (0x00000008)

CONTROL_SCENE_MODE_CANDLELIGHT

public static final int CONTROL_SCENE_MODE_CANDLELIGHT

Optimized for dim settings where the main light source is a candle.

See also:

CaptureRequest.CONTROL_SCENE_MODE

Constant Value: 15 (0x0000000f)

CONTROL_SCENE_MODE_DISABLED

public static final int CONTROL_SCENE_MODE_DISABLED

Indicates that no scene modes are set for a given capture request.

See also:

CaptureRequest.CONTROL_SCENE_MODE

Constant Value: 0 (0x00000000)

CONTROL_SCENE_MODE_FACE_PRIORITY

public static final int CONTROL_SCENE_MODE_FACE_PRIORITY

If face detection support exists, use face detection data for auto-focus, auto-white balance, and auto-exposure routines.

If face detection statistics are disabled (i.e. android.statistics.faceDetectMode is set to OFF), this should still operate correctly (but will not return face detection statistics to the framework).

Unlike the other scene modes, android.control.aeMode, android.control.awbMode, and android.control.afMode remain active when FACE_PRIORITY is set.

See also:

Constant Value: 1 (0x00000001)

CONTROL_SCENE_MODE_FIREWORKS

public static final int CONTROL_SCENE_MODE_FIREWORKS

Optimized for nighttime photos of fireworks.

See also:

CaptureRequest.CONTROL_SCENE_MODE

Constant Value: 12 (0x0000000c)

CONTROL_SCENE_MODE_HDR

public static final int CONTROL_SCENE_MODE_HDR

Turn on a device-specific high dynamic range (HDR) mode.

In this scene mode, the camera device captures images that keep a larger range of scene illumination levels visible in the final image. For example, when taking a picture of a object in front of a bright window, both the object and the scene through the window may be visible when using HDR mode, while in normal AUTO mode, one or the other may be poorly exposed. As a tradeoff, HDR mode generally takes much longer to capture a single image, has no user control, and may have other artifacts depending on the HDR method used.

Therefore, HDR captures operate at a much slower rate than regular captures.

In this mode, on LIMITED or FULL devices, when a request is made with a android.control.captureIntent of STILL_CAPTURE, the camera device will capture an image using a high dynamic range capture technique. On LEGACY devices, captures that target a JPEG-format output will be captured with HDR, and the capture intent is not relevant.

The HDR capture may involve the device capturing a burst of images internally and combining them into one, or it may involve the device using specialized high dynamic range capture hardware. In all cases, a single image is produced in response to a capture request submitted while in HDR mode.

Since substantial post-processing is generally needed to produce an HDR image, only YUV, PRIVATE, and JPEG outputs are supported for LIMITED/FULL device HDR captures, and only JPEG outputs are supported for LEGACY HDR captures. Using a RAW output for HDR capture is not supported.

Some devices may also support always-on HDR, which applies HDR processing at full frame rate. For these devices, intents other than STILL_CAPTURE will also produce an HDR output with no frame rate impact compared to normal operation, though the quality may be lower than for STILL_CAPTURE intents.

If SCENE_MODE_HDR is used with unsupported output types or capture intents, the images captured will be as if the SCENE_MODE was not enabled at all.

See also:

Constant Value: 18 (0x00000012)

CONTROL_SCENE_MODE_HIGH_SPEED_VIDEO

public static final int CONTROL_SCENE_MODE_HIGH_SPEED_VIDEO

This constant is deprecated.
Please refer to this API documentation to find the alternatives

This is deprecated, please use CameraDevice.createConstrainedHighSpeedCaptureSession(List, CameraCaptureSession.StateCallback, Handler) and CameraConstrainedHighSpeedCaptureSession.createHighSpeedRequestList(CaptureRequest) for high speed video recording.

Optimized for high speed video recording (frame rate >=60fps) use case.

The supported high speed video sizes and fps ranges are specified in android.control.availableHighSpeedVideoConfigurations. To get desired output frame rates, the application is only allowed to select video size and fps range combinations listed in this static metadata. The fps range can be control via android.control.aeTargetFpsRange.

In this mode, the camera device will override aeMode, awbMode, and afMode to ON, ON, and CONTINUOUS_VIDEO, respectively. All post-processing block mode controls will be overridden to be FAST. Therefore, no manual control of capture and post-processing parameters is possible. All other controls operate the same as when android.control.mode == AUTO. This means that all other android.control.* fields continue to work, such as

Outside of android.control.*, the following controls will work:

android.flash.mode (automatic flash for still capture will not work since aeMode is ON)
android.lens.opticalStabilizationMode (if it is supported)
android.scaler.cropRegion
android.statistics.faceDetectMode

For high speed recording use case, the actual maximum supported frame rate may be lower than what camera can output, depending on the destination Surfaces for the image data. For example, if the destination surface is from video encoder, the application need check if the video encoder is capable of supporting the high frame rate for a given video size, or it will end up with lower recording frame rate. If the destination surface is from preview window, the preview frame rate will be bounded by the screen refresh rate.

The camera device will only support up to 2 output high speed streams (processed non-stalling format defined in android.request.maxNumOutputStreams) in this mode. This control will be effective only if all of below conditions are true:

The application created no more than maxNumHighSpeedStreams processed non-stalling format output streams, where maxNumHighSpeedStreams is calculated as min(2, android.request.maxNumOutputStreams[Processed (but not-stalling)]).
The stream sizes are selected from the sizes reported by android.control.availableHighSpeedVideoConfigurations.
No processed non-stalling or raw streams are configured.

When above conditions are NOT satistied, the controls of this mode and android.control.aeTargetFpsRange will be ignored by the camera device, the camera device will fall back to android.control.mode == AUTO, and the returned capture result metadata will give the fps range choosen by the camera device.

Switching into or out of this mode may trigger some camera ISP/sensor reconfigurations, which may introduce extra latency. It is recommended that the application avoids unnecessary scene mode switch as much as possible.

See also:

Constant Value: 17 (0x00000011)

CONTROL_SCENE_MODE_LANDSCAPE

public static final int CONTROL_SCENE_MODE_LANDSCAPE

Optimized for photos of distant macroscopic objects.

See also:

CaptureRequest.CONTROL_SCENE_MODE

Constant Value: 4 (0x00000004)

CONTROL_SCENE_MODE_NIGHT

public static final int CONTROL_SCENE_MODE_NIGHT

Optimized for low-light settings.

See also:

CaptureRequest.CONTROL_SCENE_MODE

Constant Value: 5 (0x00000005)

CONTROL_SCENE_MODE_NIGHT_PORTRAIT

public static final int CONTROL_SCENE_MODE_NIGHT_PORTRAIT

Optimized for still photos of people in low-light settings.

See also:

CaptureRequest.CONTROL_SCENE_MODE

Constant Value: 6 (0x00000006)

CONTROL_SCENE_MODE_PARTY

public static final int CONTROL_SCENE_MODE_PARTY

Optimized for dim, indoor settings with multiple moving people.

See also:

CaptureRequest.CONTROL_SCENE_MODE

Constant Value: 14 (0x0000000e)

CONTROL_SCENE_MODE_PORTRAIT

public static final int CONTROL_SCENE_MODE_PORTRAIT

Optimized for still photos of people.

See also:

CaptureRequest.CONTROL_SCENE_MODE

Constant Value: 3 (0x00000003)

CONTROL_SCENE_MODE_SNOW

public static final int CONTROL_SCENE_MODE_SNOW

Optimized for bright, outdoor settings containing snow.

See also:

CaptureRequest.CONTROL_SCENE_MODE

Constant Value: 9 (0x00000009)

CONTROL_SCENE_MODE_SPORTS

public static final int CONTROL_SCENE_MODE_SPORTS

Optimized for photos of quickly moving people.

Similar to ACTION.

See also:

CaptureRequest.CONTROL_SCENE_MODE

Constant Value: 13 (0x0000000d)

CONTROL_SCENE_MODE_STEADYPHOTO

public static final int CONTROL_SCENE_MODE_STEADYPHOTO

Optimized to avoid blurry photos due to small amounts of device motion (for example: due to hand shake).

See also:

CaptureRequest.CONTROL_SCENE_MODE

Constant Value: 11 (0x0000000b)

CONTROL_SCENE_MODE_SUNSET

public static final int CONTROL_SCENE_MODE_SUNSET

Optimized for scenes of the setting sun.

See also:

CaptureRequest.CONTROL_SCENE_MODE

Constant Value: 10 (0x0000000a)

CONTROL_SCENE_MODE_THEATRE

public static final int CONTROL_SCENE_MODE_THEATRE

Optimized for dim, indoor settings where flash must remain off.

See also:

CaptureRequest.CONTROL_SCENE_MODE

Constant Value: 7 (0x00000007)

CONTROL_VIDEO_STABILIZATION_MODE_OFF

public static final int CONTROL_VIDEO_STABILIZATION_MODE_OFF

Video stabilization is disabled.

See also:

CaptureRequest.CONTROL_VIDEO_STABILIZATION_MODE

Constant Value: 0 (0x00000000)

CONTROL_VIDEO_STABILIZATION_MODE_ON

public static final int CONTROL_VIDEO_STABILIZATION_MODE_ON

Video stabilization is enabled.

See also:

CaptureRequest.CONTROL_VIDEO_STABILIZATION_MODE

Constant Value: 1 (0x00000001)

DISTORTION_CORRECTION_MODE_FAST

public static final int DISTORTION_CORRECTION_MODE_FAST

Lens distortion correction is applied without reducing frame rate relative to sensor output. It may be the same as OFF if distortion correction would reduce frame rate relative to sensor.

See also:

CaptureRequest.DISTORTION_CORRECTION_MODE

Constant Value: 1 (0x00000001)

DISTORTION_CORRECTION_MODE_HIGH_QUALITY

public static final int DISTORTION_CORRECTION_MODE_HIGH_QUALITY

High-quality distortion correction is applied, at the cost of possibly reduced frame rate relative to sensor output.

See also:

CaptureRequest.DISTORTION_CORRECTION_MODE

Constant Value: 2 (0x00000002)

DISTORTION_CORRECTION_MODE_OFF

public static final int DISTORTION_CORRECTION_MODE_OFF

No distortion correction is applied.

See also:

CaptureRequest.DISTORTION_CORRECTION_MODE

Constant Value: 0 (0x00000000)

EDGE_MODE_FAST

public static final int EDGE_MODE_FAST

Apply edge enhancement at a quality level that does not slow down frame rate relative to sensor output. It may be the same as OFF if edge enhancement will slow down frame rate relative to sensor.

See also:

CaptureRequest.EDGE_MODE

Constant Value: 1 (0x00000001)

EDGE_MODE_HIGH_QUALITY

public static final int EDGE_MODE_HIGH_QUALITY

Apply high-quality edge enhancement, at a cost of possibly reduced output frame rate.

See also:

CaptureRequest.EDGE_MODE

Constant Value: 2 (0x00000002)

EDGE_MODE_OFF

public static final int EDGE_MODE_OFF

No edge enhancement is applied.

See also:

CaptureRequest.EDGE_MODE

Constant Value: 0 (0x00000000)

EDGE_MODE_ZERO_SHUTTER_LAG

public static final int EDGE_MODE_ZERO_SHUTTER_LAG

Edge enhancement is applied at different levels for different output streams, based on resolution. Streams at maximum recording resolution (see CameraDevice.createCaptureSession(SessionConfiguration)) or below have edge enhancement applied, while higher-resolution streams have no edge enhancement applied. The level of edge enhancement for low-resolution streams is tuned so that frame rate is not impacted, and the quality is equal to or better than FAST (since it is only applied to lower-resolution outputs, quality may improve from FAST).

This mode is intended to be used by applications operating in a zero-shutter-lag mode with YUV or PRIVATE reprocessing, where the application continuously captures high-resolution intermediate buffers into a circular buffer, from which a final image is produced via reprocessing when a user takes a picture. For such a use case, the high-resolution buffers must not have edge enhancement applied to maximize efficiency of preview and to avoid double-applying enhancement when reprocessed, while low-resolution buffers (used for recording or preview, generally) need edge enhancement applied for reasonable preview quality.

This mode is guaranteed to be supported by devices that support either the YUV_REPROCESSING or PRIVATE_REPROCESSING capabilities (android.request.availableCapabilities lists either of those capabilities) and it will be the default mode for CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG template.

See also:

Constant Value: 3 (0x00000003)

FLASH_MODE_OFF

public static final int FLASH_MODE_OFF

Do not fire the flash for this capture.

See also:

CaptureRequest.FLASH_MODE

Constant Value: 0 (0x00000000)

FLASH_MODE_SINGLE

public static final int FLASH_MODE_SINGLE

If the flash is available and charged, fire flash for this capture.

See also:

CaptureRequest.FLASH_MODE

Constant Value: 1 (0x00000001)

FLASH_MODE_TORCH

public static final int FLASH_MODE_TORCH

Transition flash to continuously on.

See also:

CaptureRequest.FLASH_MODE

Constant Value: 2 (0x00000002)

FLASH_STATE_CHARGING

public static final int FLASH_STATE_CHARGING

Flash is charging and cannot be fired.

See also:

CaptureResult.FLASH_STATE

Constant Value: 1 (0x00000001)

FLASH_STATE_FIRED

public static final int FLASH_STATE_FIRED

Flash fired for this capture.

See also:

CaptureResult.FLASH_STATE

Constant Value: 3 (0x00000003)

FLASH_STATE_PARTIAL

public static final int FLASH_STATE_PARTIAL

Flash partially illuminated this frame.

This is usually due to the next or previous frame having the flash fire, and the flash spilling into this capture due to hardware limitations.

See also:

CaptureResult.FLASH_STATE

Constant Value: 4 (0x00000004)

FLASH_STATE_READY

public static final int FLASH_STATE_READY

Flash is ready to fire.

See also:

CaptureResult.FLASH_STATE

Constant Value: 2 (0x00000002)

FLASH_STATE_UNAVAILABLE

public static final int FLASH_STATE_UNAVAILABLE

No flash on camera.

See also:

CaptureResult.FLASH_STATE

Constant Value: 0 (0x00000000)

HOT_PIXEL_MODE_FAST

public static final int HOT_PIXEL_MODE_FAST

Hot pixel correction is applied, without reducing frame rate relative to sensor raw output.

The hotpixel map may be returned in android.statistics.hotPixelMap.

See also:

Constant Value: 1 (0x00000001)

HOT_PIXEL_MODE_HIGH_QUALITY

public static final int HOT_PIXEL_MODE_HIGH_QUALITY

High-quality hot pixel correction is applied, at a cost of possibly reduced frame rate relative to sensor raw output.

The hotpixel map may be returned in android.statistics.hotPixelMap.

See also:

Constant Value: 2 (0x00000002)

HOT_PIXEL_MODE_OFF

public static final int HOT_PIXEL_MODE_OFF

No hot pixel correction is applied.

The frame rate must not be reduced relative to sensor raw output for this option.

The hotpixel map may be returned in android.statistics.hotPixelMap.

See also:

Constant Value: 0 (0x00000000)

INFO_SUPPORTED_HARDWARE_LEVEL_3

public static final int INFO_SUPPORTED_HARDWARE_LEVEL_3

This camera device is capable of YUV reprocessing and RAW data capture, in addition to FULL-level capabilities.

The stream configurations listed in the LEVEL_3, RAW, FULL, LEGACY and LIMITED tables in the createCaptureSession documentation are guaranteed to be supported.

The following additional capabilities are guaranteed to be supported:

YUV_REPROCESSING capability (android.request.availableCapabilities contains YUV_REPROCESSING)
RAW capability (android.request.availableCapabilities contains RAW)

See also:

Constant Value: 3 (0x00000003)

INFO_SUPPORTED_HARDWARE_LEVEL_EXTERNAL

public static final int INFO_SUPPORTED_HARDWARE_LEVEL_EXTERNAL

This camera device is backed by an external camera connected to this Android device.

The device has capability identical to a LIMITED level device, with the following exceptions:

The device may not report lens/sensor related information such as
The device will report 0 for android.sensor.orientation
The device has less guarantee on stable framerate, as the framerate partly depends on the external camera being used.

See also:

Constant Value: 4 (0x00000004)

INFO_SUPPORTED_HARDWARE_LEVEL_FULL

public static final int INFO_SUPPORTED_HARDWARE_LEVEL_FULL

This camera device is capable of supporting advanced imaging applications.

The stream configurations listed in the FULL, LEGACY and LIMITED tables in the createCaptureSession documentation are guaranteed to be supported.

A FULL device will support below capabilities:

BURST_CAPTURE capability (android.request.availableCapabilities contains BURST_CAPTURE)
Per frame control (android.sync.maxLatency == PER_FRAME_CONTROL)
Manual sensor control (android.request.availableCapabilities contains MANUAL_SENSOR)
Manual post-processing control (android.request.availableCapabilities contains MANUAL_POST_PROCESSING)
The required exposure time range defined in android.sensor.info.exposureTimeRange
The required maxFrameDuration defined in android.sensor.info.maxFrameDuration

Note: Pre-API level 23, FULL devices also supported arbitrary cropping region (android.scaler.croppingType == FREEFORM); this requirement was relaxed in API level 23, and FULL devices may only support CENTERED cropping.

See also:

Constant Value: 1 (0x00000001)

INFO_SUPPORTED_HARDWARE_LEVEL_LEGACY

public static final int INFO_SUPPORTED_HARDWARE_LEVEL_LEGACY

This camera device is running in backward compatibility mode.

Only the stream configurations listed in the LEGACY table in the createCaptureSession documentation are supported.

A LEGACY device does not support per-frame control, manual sensor control, manual post-processing, arbitrary cropping regions, and has relaxed performance constraints. No additional capabilities beyond BACKWARD_COMPATIBLE will ever be listed by a LEGACY device in android.request.availableCapabilities.

In addition, the android.control.aePrecaptureTrigger is not functional on LEGACY devices. Instead, every request that includes a JPEG-format output target is treated as triggering a still capture, internally executing a precapture trigger. This may fire the flash for flash power metering during precapture, and then fire the flash for the final capture, if a flash is available on the device and the AE mode is set to enable the flash.

Devices that initially shipped with Android version Q or newer will not include any LEGACY-level devices.

See also:

Constant Value: 2 (0x00000002)

INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED

public static final int INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED

This camera device does not have enough capabilities to qualify as a FULL device or better.

Only the stream configurations listed in the LEGACY and LIMITED tables in the createCaptureSession documentation are guaranteed to be supported.

All LIMITED devices support the BACKWARDS_COMPATIBLE capability, indicating basic support for color image capture. The only exception is that the device may alternatively support only the DEPTH_OUTPUT capability, if it can only output depth measurements and not color images.

LIMITED devices and above require the use of android.control.aePrecaptureTrigger to lock exposure metering (and calculate flash power, for cameras with flash) before capturing a high-quality still image.

A LIMITED device that only lists the BACKWARDS_COMPATIBLE capability is only required to support full-automatic operation and post-processing (OFF is not supported for android.control.aeMode, android.control.afMode, or android.control.awbMode)

Additional capabilities may optionally be supported by a LIMITED-level device, and can be checked for in android.request.availableCapabilities.

See also:

Constant Value: 0 (0x00000000)

LENS_FACING_BACK

public static final int LENS_FACING_BACK

The camera device faces the opposite direction as the device's screen.

See also:

CameraCharacteristics.LENS_FACING

Constant Value: 1 (0x00000001)

LENS_FACING_EXTERNAL

public static final int LENS_FACING_EXTERNAL

The camera device is an external camera, and has no fixed facing relative to the device's screen.

See also:

CameraCharacteristics.LENS_FACING

Constant Value: 2 (0x00000002)

LENS_FACING_FRONT

public static final int LENS_FACING_FRONT

The camera device faces the same direction as the device's screen.

See also:

CameraCharacteristics.LENS_FACING

Constant Value: 0 (0x00000000)

LENS_INFO_FOCUS_DISTANCE_CALIBRATION_APPROXIMATE

public static final int LENS_INFO_FOCUS_DISTANCE_CALIBRATION_APPROXIMATE

The lens focus distance is measured in diopters.

However, setting the lens to the same focus distance on separate occasions may result in a different real focus distance, depending on factors such as the orientation of the device, the age of the focusing mechanism, and the device temperature.

See also:

CameraCharacteristics.LENS_INFO_FOCUS_DISTANCE_CALIBRATION

Constant Value: 1 (0x00000001)

LENS_INFO_FOCUS_DISTANCE_CALIBRATION_CALIBRATED

public static final int LENS_INFO_FOCUS_DISTANCE_CALIBRATION_CALIBRATED

The lens focus distance is measured in diopters, and is calibrated.

The lens mechanism is calibrated so that setting the same focus distance is repeatable on multiple occasions with good accuracy, and the focus distance corresponds to the real physical distance to the plane of best focus.

See also:

CameraCharacteristics.LENS_INFO_FOCUS_DISTANCE_CALIBRATION

Constant Value: 2 (0x00000002)

LENS_INFO_FOCUS_DISTANCE_CALIBRATION_UNCALIBRATED

public static final int LENS_INFO_FOCUS_DISTANCE_CALIBRATION_UNCALIBRATED

The lens focus distance is not accurate, and the units used for android.lens.focusDistance do not correspond to any physical units.

Setting the lens to the same focus distance on separate occasions may result in a different real focus distance, depending on factors such as the orientation of the device, the age of the focusing mechanism, and the device temperature. The focus distance value will still be in the range of [0, android.lens.info.minimumFocusDistance], where 0 represents the farthest focus.

See also:

Constant Value: 0 (0x00000000)

LENS_OPTICAL_STABILIZATION_MODE_OFF

public static final int LENS_OPTICAL_STABILIZATION_MODE_OFF

Optical stabilization is unavailable.

See also:

CaptureRequest.LENS_OPTICAL_STABILIZATION_MODE

Constant Value: 0 (0x00000000)

LENS_OPTICAL_STABILIZATION_MODE_ON

public static final int LENS_OPTICAL_STABILIZATION_MODE_ON

Optical stabilization is enabled.

See also:

CaptureRequest.LENS_OPTICAL_STABILIZATION_MODE

Constant Value: 1 (0x00000001)

LENS_POSE_REFERENCE_GYROSCOPE

public static final int LENS_POSE_REFERENCE_GYROSCOPE

The value of android.lens.poseTranslation is relative to the position of the primary gyroscope of this Android device.

See also:

Constant Value: 1 (0x00000001)

LENS_POSE_REFERENCE_PRIMARY_CAMERA

public static final int LENS_POSE_REFERENCE_PRIMARY_CAMERA

The value of android.lens.poseTranslation is relative to the optical center of the largest camera device facing the same direction as this camera.

This is the default value for API levels before Android P.

See also:

Constant Value: 0 (0x00000000)

LENS_POSE_REFERENCE_UNDEFINED

public static final int LENS_POSE_REFERENCE_UNDEFINED

The camera device cannot represent the values of android.lens.poseTranslation and android.lens.poseRotation accurately enough. One such example is a camera device on the cover of a foldable phone: in order to measure the pose translation and rotation, some kind of hinge position sensor would be needed.

The value of android.lens.poseTranslation must be all zeros, and android.lens.poseRotation must be values matching its default facing.

See also:

Constant Value: 2 (0x00000002)

LENS_STATE_MOVING

public static final int LENS_STATE_MOVING

One or several of the lens parameters (android.lens.focalLength, android.lens.focusDistance, android.lens.filterDensity or android.lens.aperture) is currently changing.

See also:

Constant Value: 1 (0x00000001)

LENS_STATE_STATIONARY

public static final int LENS_STATE_STATIONARY

The lens parameters (android.lens.focalLength, android.lens.focusDistance, android.lens.filterDensity and android.lens.aperture) are not changing.

See also:

Constant Value: 0 (0x00000000)

LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE_APPROXIMATE

public static final int LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE_APPROXIMATE

A software mechanism is used to synchronize between the physical cameras. As a result, the timestamp of an image from a physical stream is only an approximation of the image sensor start-of-exposure time.

See also:

CameraCharacteristics.LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE

Constant Value: 0 (0x00000000)

LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE_CALIBRATED

public static final int LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE_CALIBRATED

The camera device supports frame timestamp synchronization at the hardware level, and the timestamp of a physical stream image accurately reflects its start-of-exposure time.

See also:

CameraCharacteristics.LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE

Constant Value: 1 (0x00000001)

NOISE_REDUCTION_MODE_FAST

public static final int NOISE_REDUCTION_MODE_FAST

Noise reduction is applied without reducing frame rate relative to sensor output. It may be the same as OFF if noise reduction will reduce frame rate relative to sensor.

See also:

CaptureRequest.NOISE_REDUCTION_MODE

Constant Value: 1 (0x00000001)

NOISE_REDUCTION_MODE_HIGH_QUALITY

public static final int NOISE_REDUCTION_MODE_HIGH_QUALITY

High-quality noise reduction is applied, at the cost of possibly reduced frame rate relative to sensor output.

See also:

CaptureRequest.NOISE_REDUCTION_MODE

Constant Value: 2 (0x00000002)

NOISE_REDUCTION_MODE_MINIMAL

public static final int NOISE_REDUCTION_MODE_MINIMAL

MINIMAL noise reduction is applied without reducing frame rate relative to sensor output.

See also:

CaptureRequest.NOISE_REDUCTION_MODE

Constant Value: 3 (0x00000003)

NOISE_REDUCTION_MODE_OFF

public static final int NOISE_REDUCTION_MODE_OFF

No noise reduction is applied.

See also:

CaptureRequest.NOISE_REDUCTION_MODE

Constant Value: 0 (0x00000000)

NOISE_REDUCTION_MODE_ZERO_SHUTTER_LAG

public static final int NOISE_REDUCTION_MODE_ZERO_SHUTTER_LAG

Noise reduction is applied at different levels for different output streams, based on resolution. Streams at maximum recording resolution (see CameraDevice.createCaptureSession(SessionConfiguration)) or below have noise reduction applied, while higher-resolution streams have MINIMAL (if supported) or no noise reduction applied (if MINIMAL is not supported.) The degree of noise reduction for low-resolution streams is tuned so that frame rate is not impacted, and the quality is equal to or better than FAST (since it is only applied to lower-resolution outputs, quality may improve from FAST).

This mode is intended to be used by applications operating in a zero-shutter-lag mode with YUV or PRIVATE reprocessing, where the application continuously captures high-resolution intermediate buffers into a circular buffer, from which a final image is produced via reprocessing when a user takes a picture. For such a use case, the high-resolution buffers must not have noise reduction applied to maximize efficiency of preview and to avoid over-applying noise filtering when reprocessing, while low-resolution buffers (used for recording or preview, generally) need noise reduction applied for reasonable preview quality.

See also:

Constant Value: 4 (0x00000004)

REQUEST_AVAILABLE_CAPABILITIES_BACKWARD_COMPATIBLE

public static final int REQUEST_AVAILABLE_CAPABILITIES_BACKWARD_COMPATIBLE

The minimal set of capabilities that every camera device (regardless of android.info.supportedHardwareLevel) supports.

This capability is listed by all normal devices, and indicates that the camera device has a feature set that's comparable to the baseline requirements for the older android.hardware.Camera API.

Devices with the DEPTH_OUTPUT capability might not list this capability, indicating that they support only depth measurement, not standard color output.

See also:

Constant Value: 0 (0x00000000)

REQUEST_AVAILABLE_CAPABILITIES_BURST_CAPTURE

public static final int REQUEST_AVAILABLE_CAPABILITIES_BURST_CAPTURE

The camera device supports capturing high-resolution images at >= 20 frames per second, in at least the uncompressed YUV format, when post-processing settings are set to FAST. Additionally, all image resolutions less than 24 megapixels can be captured at >= 10 frames per second. Here, 'high resolution' means at least 8 megapixels, or the maximum resolution of the device, whichever is smaller.

More specifically, this means that a size matching the camera device's active array size is listed as a supported size for the ImageFormat.YUV_420_888 format in either StreamConfigurationMap.getOutputSizes(int) or StreamConfigurationMap.getHighResolutionOutputSizes(int), with a minimum frame duration for that format and size of either <= 1/20 s, or <= 1/10 s if the image size is less than 24 megapixels, respectively; and the android.control.aeAvailableTargetFpsRanges entry lists at least one FPS range where the minimum FPS is >= 1 / minimumFrameDuration for the maximum-size YUV_420_888 format. If that maximum size is listed in StreamConfigurationMap.getHighResolutionOutputSizes(int), then the list of resolutions for YUV_420_888 from StreamConfigurationMap.getOutputSizes(int) contains at least one resolution >= 8 megapixels, with a minimum frame duration of <= 1/20 s.

If the device supports the ImageFormat.RAW10, ImageFormat.RAW12, ImageFormat.Y8, then those can also be captured at the same rate as the maximum-size YUV_420_888 resolution is.

If the device supports the PRIVATE_REPROCESSING capability, then the same guarantees as for the YUV_420_888 format also apply to the ImageFormat.PRIVATE format.

In addition, the android.sync.maxLatency field is guaranted to have a value between 0 and 4, inclusive. android.control.aeLockAvailable and android.control.awbLockAvailable are also guaranteed to be true so burst capture with these two locks ON yields consistent image output.

See also:

Constant Value: 6 (0x00000006)

REQUEST_AVAILABLE_CAPABILITIES_CONSTRAINED_HIGH_SPEED_VIDEO

public static final int REQUEST_AVAILABLE_CAPABILITIES_CONSTRAINED_HIGH_SPEED_VIDEO

The device supports constrained high speed video recording (frame rate >=120fps) use case. The camera device will support high speed capture session created by CameraDevice.createConstrainedHighSpeedCaptureSession(List, CameraCaptureSession.StateCallback, Handler), which only accepts high speed request lists created by CameraConstrainedHighSpeedCaptureSession.createHighSpeedRequestList(CaptureRequest).

A camera device can still support high speed video streaming by advertising the high speed FPS ranges in android.control.aeAvailableTargetFpsRanges. For this case, all normal capture request per frame control and synchronization requirements will apply to the high speed fps ranges, the same as all other fps ranges. This capability describes the capability of a specialized operating mode with many limitations (see below), which is only targeted at high speed video recording.

The supported high speed video sizes and fps ranges are specified in StreamConfigurationMap.getHighSpeedVideoFpsRanges(). To get desired output frame rates, the application is only allowed to select video size and FPS range combinations provided by StreamConfigurationMap.getHighSpeedVideoSizes(). The fps range can be controlled via android.control.aeTargetFpsRange.

In this capability, the camera device will override aeMode, awbMode, and afMode to ON, AUTO, and CONTINUOUS_VIDEO, respectively. All post-processing block mode controls will be overridden to be FAST. Therefore, no manual control of capture and post-processing parameters is possible. All other controls operate the same as when android.control.mode == AUTO. This means that all other android.control.* fields continue to work, such as

Outside of android.control.*, the following controls will work:

android.flash.mode (TORCH mode only, automatic flash for still capture will not work since aeMode is ON)
android.lens.opticalStabilizationMode (if it is supported)
android.scaler.cropRegion
android.statistics.faceDetectMode (if it is supported)

For high speed recording use case, the actual maximum supported frame rate may be lower than what camera can output, depending on the destination Surfaces for the image data. For example, if the destination surface is from video encoder, the application need check if the video encoder is capable of supporting the high frame rate for a given video size, or it will end up with lower recording frame rate. If the destination surface is from preview window, the actual preview frame rate will be bounded by the screen refresh rate.

The camera device will only support up to 2 high speed simultaneous output surfaces (preview and recording surfaces) in this mode. Above controls will be effective only if all of below conditions are true:

The application creates a camera capture session with no more than 2 surfaces via CameraDevice.createConstrainedHighSpeedCaptureSession(List, CameraCaptureSession.StateCallback, Handler). The targeted surfaces must be preview surface (either from SurfaceView or SurfaceTexture) or recording surface(either from MediaRecorder.getSurface() or MediaCodec.createInputSurface()).
The stream sizes are selected from the sizes reported by StreamConfigurationMap.getHighSpeedVideoSizes().
The FPS ranges are selected from StreamConfigurationMap.getHighSpeedVideoFpsRanges().

When above conditions are NOT satistied, CameraDevice.createConstrainedHighSpeedCaptureSession(List, CameraCaptureSession.StateCallback, Handler) will fail.

Switching to a FPS range that has different maximum FPS may trigger some camera device reconfigurations, which may introduce extra latency. It is recommended that the application avoids unnecessary maximum target FPS changes as much as possible during high speed streaming.

See also:

Constant Value: 9 (0x00000009)

REQUEST_AVAILABLE_CAPABILITIES_DEPTH_OUTPUT

public static final int REQUEST_AVAILABLE_CAPABILITIES_DEPTH_OUTPUT

The camera device can produce depth measurements from its field of view.

This capability requires the camera device to support the following:

ImageFormat.DEPTH16 is supported as an output format.
ImageFormat.DEPTH_POINT_CLOUD is optionally supported as an output format.
This camera device, and all camera devices with the same android.lens.facing, will list the following calibration metadata entries in both CameraCharacteristics and CaptureResult:
The android.depth.depthIsExclusive entry is listed by this device.
As of Android P, the android.lens.poseReference entry is listed by this device.
A LIMITED camera with only the DEPTH_OUTPUT capability does not have to support normal YUV_420_888, Y8, JPEG, and PRIV-format outputs. It only has to support the DEPTH16 format.

Generally, depth output operates at a slower frame rate than standard color capture, so the DEPTH16 and DEPTH_POINT_CLOUD formats will commonly have a stall duration that should be accounted for (see StreamConfigurationMap.getOutputStallDuration(int, Size)). On a device that supports both depth and color-based output, to enable smooth preview, using a repeating burst is recommended, where a depth-output target is only included once every N frames, where N is the ratio between preview output rate and depth output rate, including depth stall time.

See also:

Constant Value: 8 (0x00000008)

REQUEST_AVAILABLE_CAPABILITIES_LOGICAL_MULTI_CAMERA

public static final int REQUEST_AVAILABLE_CAPABILITIES_LOGICAL_MULTI_CAMERA

The camera device is a logical camera backed by two or more physical cameras.

In API level 28, the physical cameras must also be exposed to the application via CameraManager.getCameraIdList().

Starting from API level 29:

Some or all physical cameras may not be independently exposed to the application, in which case the physical camera IDs will not be available in CameraManager.getCameraIdList(). But the application can still query the physical cameras' characteristics by calling CameraManager.getCameraCharacteristics(String).
If a physical camera is hidden from camera ID list, the mandatory stream combinations for that physical camera must be supported through the logical camera using physical streams. One exception is that in API level 30, a physical camera may become unavailable via CameraManager.AvailabilityCallback#onPhysicalCameraUnavailable callback.

Combinations of logical and physical streams, or physical streams from different physical cameras are not guaranteed. However, if the camera device supports CameraDevice#isSessionConfigurationSupported, application must be able to query whether a stream combination involving physical streams is supported by calling CameraDevice#isSessionConfigurationSupported.

Camera application shouldn't assume that there are at most 1 rear camera and 1 front camera in the system. For an application that switches between front and back cameras, the recommendation is to switch between the first rear camera and the first front camera in the list of supported camera devices.

This capability requires the camera device to support the following:

The IDs of underlying physical cameras are returned via CameraCharacteristics.getPhysicalCameraIds().
This camera device must list static metadata android.logicalMultiCamera.sensorSyncType in CameraCharacteristics.
The underlying physical cameras' static metadata must list the following entries, so that the application can correlate pixels from the physical streams:
The SENSOR_INFO_TIMESTAMP_SOURCE of the logical device and physical devices must be the same.
The logical camera must be LIMITED or higher device.

A logical camera device's dynamic metadata may contain android.logicalMultiCamera.activePhysicalId to notify the application of the current active physical camera Id. An active physical camera is the physical camera from which the logical camera's main image data outputs (YUV or RAW) and metadata come from. In addition, this serves as an indication which physical camera is used to output to a RAW stream, or in case only physical cameras support RAW, which physical RAW stream the application should request.

Logical camera's static metadata tags below describe the default active physical camera. An active physical camera is default if it's used when application directly uses requests built from a template. All templates will default to the same active physical camera.

The field of view of non-RAW physical streams must not be smaller than that of the non-RAW logical streams, or the maximum field-of-view of the physical camera, whichever is smaller. The application should check the physical capture result metadata for how the physical streams are cropped or zoomed. More specifically, given the physical camera result metadata, the effective horizontal field-of-view of the physical camera is:

fov = 2 * atan2(cropW * sensorW / (2 * zoomRatio * activeArrayW), focalLength)

where the equation parameters are the physical camera's crop region width, physical sensor width, zoom ratio, active array width, and focal length respectively. Typically the physical stream of active physical camera has the same field-of-view as the logical streams. However, the same may not be true for physical streams from non-active physical cameras. For example, if the logical camera has a wide-ultrawide configuration where the wide lens is the default, when the crop region is set to the logical camera's active array size, (and the zoom ratio set to 1.0 starting from Android 11), a physical stream for the ultrawide camera may prefer outputing images with larger field-of-view than that of the wide camera for better stereo matching margin or more robust motion tracking. At the same time, the physical non-RAW streams' field of view must not be smaller than the requested crop region and zoom ratio, as long as it's within the physical lens' capability. For example, for a logical camera with wide-tele lens configuration where the wide lens is the default, if the logical camera's crop region is set to maximum size, and zoom ratio set to 1.0, the physical stream for the tele lens will be configured to its maximum size crop region (no zoom).

Deprecated: Prior to Android 11, the field of view of all non-RAW physical streams cannot be larger than that of non-RAW logical streams. If the logical camera has a wide-ultrawide lens configuration where the wide lens is the default, when the logical camera's crop region is set to maximum size, the FOV of the physical streams for the ultrawide lens will be the same as the logical stream, by making the crop region smaller than its active array size to compensate for the smaller focal length.

There are two ways for the application to capture RAW images from a logical camera with RAW capability:

Because the underlying physical cameras may have different RAW capabilities (such as resolution or CFA pattern), to maintain backward compatibility, when a RAW stream is configured, the camera device makes sure the default active physical camera remains active and does not switch to other physical cameras. (One exception is that, if the logical camera consists of identical image sensors and advertises multiple focalLength due to different lenses, the camera device may generate RAW images from different physical cameras based on the focalLength being set by the application.) This backward-compatible approach usually results in loss of optical zoom, to telephoto lens or to ultrawide lens.
Alternatively, to take advantage of the full zoomRatio range of the logical camera, the application should use MultiResolutionImageReader to capture RAW images from the currently active physical camera. Because different physical camera may have different RAW characteristics, the application needs to use the characteristics and result metadata of the active physical camera for the relevant RAW metadata.

The capture request and result metadata tags required for backward compatible camera functionalities will be solely based on the logical camera capability. On the other hand, the use of manual capture controls (sensor or post-processing) with a logical camera may result in unexpected behavior when the HAL decides to switch between physical cameras with different characteristics under the hood. For example, when the application manually sets exposure time and sensitivity while zooming in, the brightness of the camera images may suddenly change because HAL switches from one physical camera to the other.

See also:

Constant Value: 11 (0x0000000b)

REQUEST_AVAILABLE_CAPABILITIES_MANUAL_POST_PROCESSING

public static final int REQUEST_AVAILABLE_CAPABILITIES_MANUAL_POST_PROCESSING

The camera device post-processing stages can be manually controlled. The camera device supports basic manual control of the image post-processing stages. This means the following controls are guaranteed to be supported:

Manual tonemap control
Manual white balance control
- android.colorCorrection.transform
- android.colorCorrection.gains
Manual lens shading map control
- android.shading.mode
- android.statistics.lensShadingMapMode
- android.statistics.lensShadingMap
- android.lens.info.shadingMapSize
Manual aberration correction control (if aberration correction is supported)
- android.colorCorrection.aberrationMode
- android.colorCorrection.availableAberrationModes
Auto white balance lock
- android.control.awbLock

If auto white balance is enabled, then the camera device will accurately report the values applied by AWB in the result.

A given camera device may also support additional post-processing controls, but this capability only covers the above list of controls.

For camera devices with LOGICAL_MULTI_CAMERA capability, when underlying active physical camera switches, tonemap, white balance, and shading map may change even if awb is locked. However, the overall post-processing experience for users will be consistent. Refer to LOGICAL_MULTI_CAMERA capability for details.

See also:

Constant Value: 2 (0x00000002)

REQUEST_AVAILABLE_CAPABILITIES_MANUAL_SENSOR

public static final int REQUEST_AVAILABLE_CAPABILITIES_MANUAL_SENSOR

The camera device can be manually controlled (3A algorithms such as auto-exposure, and auto-focus can be bypassed). The camera device supports basic manual control of the sensor image acquisition related stages. This means the following controls are guaranteed to be supported:

Manual frame duration control
- android.sensor.frameDuration
- android.sensor.info.maxFrameDuration
Manual exposure control
- android.sensor.exposureTime
- android.sensor.info.exposureTimeRange
Manual sensitivity control
- android.sensor.sensitivity
- android.sensor.info.sensitivityRange
Manual lens control (if the lens is adjustable)
- android.lens.*
Manual flash control (if a flash unit is present)
- android.flash.*
Manual black level locking
- android.blackLevel.lock
Auto exposure lock
- android.control.aeLock

If any of the above 3A algorithms are enabled, then the camera device will accurately report the values applied by 3A in the result.

A given camera device may also support additional manual sensor controls, but this capability only covers the above list of controls.

If this is supported, android.scaler.streamConfigurationMap will additionally return a min frame duration that is greater than zero for each supported size-format combination.

For camera devices with LOGICAL_MULTI_CAMERA capability, when the underlying active physical camera switches, exposureTime, sensitivity, and lens properties may change even if AE/AF is locked. However, the overall auto exposure and auto focus experience for users will be consistent. Refer to LOGICAL_MULTI_CAMERA capability for details.

See also:

Constant Value: 1 (0x00000001)

REQUEST_AVAILABLE_CAPABILITIES_MONOCHROME

public static final int REQUEST_AVAILABLE_CAPABILITIES_MONOCHROME

The camera device is a monochrome camera that doesn't contain a color filter array, and for YUV_420_888 stream, the pixel values on U and V planes are all 128.

A MONOCHROME camera must support the guaranteed stream combinations required for its device level and capabilities. Additionally, if the monochrome camera device supports Y8 format, all mandatory stream combination requirements related to YUV_420_888 apply to Y8 as well. There are no mandatory stream combination requirements with regard to Y8 for Bayer camera devices.

Starting from Android Q, the SENSOR_INFO_COLOR_FILTER_ARRANGEMENT of a MONOCHROME camera will be either MONO or NIR.

See also:

CameraCharacteristics.REQUEST_AVAILABLE_CAPABILITIES

Constant Value: 12 (0x0000000c)

REQUEST_AVAILABLE_CAPABILITIES_MOTION_TRACKING

public static final int REQUEST_AVAILABLE_CAPABILITIES_MOTION_TRACKING

The camera device supports the MOTION_TRACKING value for android.control.captureIntent, which limits maximum exposure time to 20 ms.

This limits the motion blur of capture images, resulting in better image tracking results for use cases such as image stabilization or augmented reality.

See also:

Constant Value: 10 (0x0000000a)

REQUEST_AVAILABLE_CAPABILITIES_OFFLINE_PROCESSING

public static final int REQUEST_AVAILABLE_CAPABILITIES_OFFLINE_PROCESSING

The camera device supports the OFFLINE_PROCESSING use case.

With OFFLINE_PROCESSING capability, the application can switch an ongoing capture session to offline mode by calling the CameraCaptureSession#switchToOffline method and specify streams to be kept in offline mode. The camera will then stop currently active repeating requests, prepare for some requests to go into offline mode, and return an offline session object. After the switchToOffline call returns, the original capture session is in closed state as if the CameraCaptureSession#close method has been called. In the offline mode, all inflight requests will continue to be processed in the background, and the application can immediately close the camera or create a new capture session without losing those requests' output images and capture results.

While the camera device is processing offline requests, it might not be able to support all stream configurations it can support without offline requests. When that happens, the createCaptureSession method call will fail. The following stream configurations are guaranteed to work without hitting the resource busy exception:

One ongoing offline session: target one output surface of YUV or JPEG format, any resolution.
The active camera capture session:
1. One preview surface (SurfaceView or SurfaceTexture) up to 1920 width
2. One YUV ImageReader surface up to 1920 width
3. One Jpeg ImageReader, any resolution: the camera device is allowed to slow down JPEG output speed by 50% if there is any ongoing offline session.
4. If the device supports PRIVATE_REPROCESSING, one pair of ImageWriter/ImageReader surfaces of private format, with the same resolution that is larger or equal to the JPEG ImageReader resolution above.
Alternatively, the active camera session above can be replaced by an legacy Camera with the following parameter settings:
1. Preview size up to 1920 width
2. Preview callback size up to 1920 width
3. Video size up to 1920 width
4. Picture size, any resolution: the camera device is allowed to slow down JPEG output speed by 50% if there is any ongoing offline session.

See also:

CameraCharacteristics.REQUEST_AVAILABLE_CAPABILITIES

Constant Value: 15 (0x0000000f)

REQUEST_AVAILABLE_CAPABILITIES_PRIVATE_REPROCESSING

public static final int REQUEST_AVAILABLE_CAPABILITIES_PRIVATE_REPROCESSING

The camera device supports the Zero Shutter Lag reprocessing use case.

One input stream is supported, that is, android.request.maxNumInputStreams == 1.
ImageFormat.PRIVATE is supported as an output/input format, that is, ImageFormat.PRIVATE is included in the lists of formats returned by StreamConfigurationMap.getInputFormats() and StreamConfigurationMap.getOutputFormats().
StreamConfigurationMap.getValidOutputFormatsForInput(int) returns non-empty int[] for each supported input format returned by StreamConfigurationMap.getInputFormats().
Each size returned by getInputSizes(ImageFormat.PRIVATE) is also included in getOutputSizes(ImageFormat.PRIVATE)
Using ImageFormat.PRIVATE does not cause a frame rate drop relative to the sensor's maximum capture rate (at that resolution).
ImageFormat.PRIVATE will be reprocessable into both ImageFormat.YUV_420_888 and ImageFormat.JPEG formats.
For a MONOCHROME camera supporting Y8 format, ImageFormat.PRIVATE will be reprocessable into ImageFormat.Y8.
The maximum available resolution for PRIVATE streams (both input/output) will match the maximum available resolution of JPEG streams.
Static metadata android.reprocess.maxCaptureStall.
Only below controls are effective for reprocessing requests and will be present in capture results, other controls in reprocess requests will be ignored by the camera device.
- android.jpeg.*
- android.noiseReduction.mode
- android.edge.mode
android.noiseReduction.availableNoiseReductionModes and android.edge.availableEdgeModes will both list ZERO_SHUTTER_LAG as a supported mode.

See also:

Constant Value: 4 (0x00000004)

REQUEST_AVAILABLE_CAPABILITIES_RAW

public static final int REQUEST_AVAILABLE_CAPABILITIES_RAW

The camera device supports outputting RAW buffers and metadata for interpreting them.

Devices supporting the RAW capability allow both for saving DNG files, and for direct application processing of raw sensor images.

RAW_SENSOR is supported as an output format.
The maximum available resolution for RAW_SENSOR streams will match either the value in android.sensor.info.pixelArraySize or android.sensor.info.preCorrectionActiveArraySize.
All DNG-related optional metadata entries are provided by the camera device.

See also:

Constant Value: 3 (0x00000003)

REQUEST_AVAILABLE_CAPABILITIES_READ_SENSOR_SETTINGS

public static final int REQUEST_AVAILABLE_CAPABILITIES_READ_SENSOR_SETTINGS

The camera device supports accurately reporting the sensor settings for many of the sensor controls while the built-in 3A algorithm is running. This allows reporting of sensor settings even when these settings cannot be manually changed.

The values reported for the following controls are guaranteed to be available in the CaptureResult, including when 3A is enabled:

Exposure control
- android.sensor.exposureTime
Sensitivity control
- android.sensor.sensitivity
Lens controls (if the lens is adjustable)
- android.lens.focusDistance
- android.lens.aperture

This capability is a subset of the MANUAL_SENSOR control capability, and will always be included if the MANUAL_SENSOR capability is available.

See also:

Constant Value: 5 (0x00000005)

REQUEST_AVAILABLE_CAPABILITIES_REMOSAIC_REPROCESSING

public static final int REQUEST_AVAILABLE_CAPABILITIES_REMOSAIC_REPROCESSING

The device supports reprocessing from the RAW_SENSOR format with a bayer pattern given by android.sensor.info.binningFactor (m x n group of pixels with the same color filter) to a remosaiced regular bayer pattern.

This capability will only be present for devices with REQUEST_AVAILABLE_CAPABILITIES_ULTRA_HIGH_RESOLUTION_SENSOR capability. When REQUEST_AVAILABLE_CAPABILITIES_ULTRA_HIGH_RESOLUTION_SENSOR devices do not advertise this capability, ImageFormat.RAW_SENSOR images will already have a regular bayer pattern.

If a RAW_SENSOR stream is requested along with another non-RAW stream in a CaptureRequest (if multiple streams are supported when android.sensor.pixelMode is set to SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION), the RAW_SENSOR stream will have a regular bayer pattern.

This capability requires the camera device to support the following : * The StreamConfigurationMap mentioned below refers to the one, described by android.scaler.streamConfigurationMapMaximumResolution. * One input stream is supported, that is, android.request.maxNumInputStreams == 1. * ImageFormat.RAW_SENSOR is supported as an output/input format, that is, ImageFormat.RAW_SENSOR is included in the lists of formats returned by StreamConfigurationMap.getInputFormats() and StreamConfigurationMap.getOutputFormats(). * StreamConfigurationMap.getValidOutputFormatsForInput(int) returns non-empty int[] for each supported input format returned by StreamConfigurationMap.getInputFormats(). * Each size returned by getInputSizes(ImageFormat.RAW_SENSOR) is also included in getOutputSizes(ImageFormat.RAW_SENSOR) * Using ImageFormat.RAW_SENSOR does not cause a frame rate drop relative to the sensor's maximum capture rate (at that resolution). * No CaptureRequest controls will be applicable when a request has an input target with ImageFormat.RAW_SENSOR format.

See also:

Constant Value: 17 (0x00000011)

REQUEST_AVAILABLE_CAPABILITIES_SECURE_IMAGE_DATA

public static final int REQUEST_AVAILABLE_CAPABILITIES_SECURE_IMAGE_DATA

The camera device is capable of writing image data into a region of memory inaccessible to Android userspace or the Android kernel, and only accessible to trusted execution environments (TEE).

See also:

CameraCharacteristics.REQUEST_AVAILABLE_CAPABILITIES

Constant Value: 13 (0x0000000d)

REQUEST_AVAILABLE_CAPABILITIES_SYSTEM_CAMERA

public static final int REQUEST_AVAILABLE_CAPABILITIES_SYSTEM_CAMERA

The camera device is only accessible by Android's system components and privileged applications. Processes need to have the android.permission.SYSTEM_CAMERA in addition to android.permission.CAMERA in order to connect to this camera device.

See also:

CameraCharacteristics.REQUEST_AVAILABLE_CAPABILITIES

Constant Value: 14 (0x0000000e)

REQUEST_AVAILABLE_CAPABILITIES_ULTRA_HIGH_RESOLUTION_SENSOR

public static final int REQUEST_AVAILABLE_CAPABILITIES_ULTRA_HIGH_RESOLUTION_SENSOR

This camera device is capable of producing ultra high resolution images in addition to the image sizes described in the android.scaler.streamConfigurationMap. It can operate in 'default' mode and 'max resolution' mode. It generally does this by binning pixels in 'default' mode and not binning them in 'max resolution' mode. android.scaler.streamConfigurationMap describes the streams supported in 'default' mode. The stream configurations supported in 'max resolution' mode are described by android.scaler.streamConfigurationMapMaximumResolution. The maximum resolution mode pixel array size of a camera device (android.sensor.info.pixelArraySize) with this capability, will be at least 24 megapixels.

See also:

Constant Value: 16 (0x00000010)

REQUEST_AVAILABLE_CAPABILITIES_YUV_REPROCESSING

public static final int REQUEST_AVAILABLE_CAPABILITIES_YUV_REPROCESSING

The camera device supports the YUV_420_888 reprocessing use case, similar as PRIVATE_REPROCESSING, This capability requires the camera device to support the following:

One input stream is supported, that is, android.request.maxNumInputStreams == 1.
ImageFormat.YUV_420_888 is supported as an output/input format, that is, YUV_420_888 is included in the lists of formats returned by StreamConfigurationMap.getInputFormats() and StreamConfigurationMap.getOutputFormats().
StreamConfigurationMap.getValidOutputFormatsForInput(int) returns non-empty int[] for each supported input format returned by StreamConfigurationMap.getInputFormats().
Each size returned by getInputSizes(YUV_420_888) is also included in getOutputSizes(YUV_420_888)
Using ImageFormat.YUV_420_888 does not cause a frame rate drop relative to the sensor's maximum capture rate (at that resolution).
ImageFormat.YUV_420_888 will be reprocessable into both ImageFormat.YUV_420_888 and ImageFormat.JPEG formats.
The maximum available resolution for ImageFormat.YUV_420_888 streams (both input/output) will match the maximum available resolution of ImageFormat.JPEG streams.
For a MONOCHROME camera with Y8 format support, all the requirements mentioned above for YUV_420_888 apply for Y8 format as well.
Static metadata android.reprocess.maxCaptureStall.
Only the below controls are effective for reprocessing requests and will be present in capture results. The reprocess requests are from the original capture results that are associated with the intermediate ImageFormat.YUV_420_888 output buffers. All other controls in the reprocess requests will be ignored by the camera device.
- android.jpeg.*
- android.noiseReduction.mode
- android.edge.mode
- android.reprocess.effectiveExposureFactor
android.noiseReduction.availableNoiseReductionModes and android.edge.availableEdgeModes will both list ZERO_SHUTTER_LAG as a supported mode.

See also:

Constant Value: 7 (0x00000007)

SCALER_CROPPING_TYPE_CENTER_ONLY

public static final int SCALER_CROPPING_TYPE_CENTER_ONLY

The camera device only supports centered crop regions.

See also:

CameraCharacteristics.SCALER_CROPPING_TYPE

Constant Value: 0 (0x00000000)

SCALER_CROPPING_TYPE_FREEFORM

public static final int SCALER_CROPPING_TYPE_FREEFORM

The camera device supports arbitrarily chosen crop regions.

See also:

CameraCharacteristics.SCALER_CROPPING_TYPE

Constant Value: 1 (0x00000001)

SCALER_ROTATE_AND_CROP_180

public static final int SCALER_ROTATE_AND_CROP_180

Processed images are rotated by 180 degrees. Since the aspect ratio does not change, no cropping is performed.

See also:

CaptureRequest.SCALER_ROTATE_AND_CROP

Constant Value: 2 (0x00000002)

SCALER_ROTATE_AND_CROP_270

public static final int SCALER_ROTATE_AND_CROP_270

Processed images are rotated by 270 degrees clockwise, and then cropped to the original aspect ratio.

See also:

CaptureRequest.SCALER_ROTATE_AND_CROP

Constant Value: 3 (0x00000003)

SCALER_ROTATE_AND_CROP_90

public static final int SCALER_ROTATE_AND_CROP_90

Processed images are rotated by 90 degrees clockwise, and then cropped to the original aspect ratio.

See also:

CaptureRequest.SCALER_ROTATE_AND_CROP

Constant Value: 1 (0x00000001)

SCALER_ROTATE_AND_CROP_AUTO

public static final int SCALER_ROTATE_AND_CROP_AUTO

The camera API automatically selects the best concrete value for rotate-and-crop based on the application's support for resizability and the current multi-window mode.

If the application does not support resizing but the display mode for its main Activity is not in a typical orientation, the camera API will set ROTATE_AND_CROP_90 or some other supported rotation value, depending on device configuration, to ensure preview and captured images are correctly shown to the user. Otherwise, ROTATE_AND_CROP_NONE will be selected.

When a value other than NONE is selected, several metadata fields will also be parsed differently to ensure that coordinates are correctly handled for features like drawing face detection boxes or passing in tap-to-focus coordinates. The camera API will convert positions in the active array coordinate system to/from the cropped-and-rotated coordinate system to make the operation transparent for applications.

No coordinate mapping will be done when the application selects a non-AUTO mode.

See also:

CaptureRequest.SCALER_ROTATE_AND_CROP

Constant Value: 4 (0x00000004)

SCALER_ROTATE_AND_CROP_NONE

public static final int SCALER_ROTATE_AND_CROP_NONE

No rotate and crop is applied. Processed outputs are in the sensor orientation.

See also:

CaptureRequest.SCALER_ROTATE_AND_CROP

Constant Value: 0 (0x00000000)

SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_BGGR

public static final int SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_BGGR

See also:

CameraCharacteristics.SENSOR_INFO_COLOR_FILTER_ARRANGEMENT

Constant Value: 3 (0x00000003)

SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_GBRG

public static final int SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_GBRG

See also:

CameraCharacteristics.SENSOR_INFO_COLOR_FILTER_ARRANGEMENT

Constant Value: 2 (0x00000002)

SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_GRBG

public static final int SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_GRBG

See also:

CameraCharacteristics.SENSOR_INFO_COLOR_FILTER_ARRANGEMENT

Constant Value: 1 (0x00000001)

SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_MONO

public static final int SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_MONO

Sensor doesn't have any Bayer color filter. Such sensor captures visible light in monochrome. The exact weighting and wavelengths captured is not specified, but generally only includes the visible frequencies. This value implies a MONOCHROME camera.

See also:

CameraCharacteristics.SENSOR_INFO_COLOR_FILTER_ARRANGEMENT

Constant Value: 5 (0x00000005)

SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_NIR

public static final int SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_NIR

Sensor has a near infrared filter capturing light with wavelength between roughly 750nm and 1400nm, and the same filter covers the whole sensor array. This value implies a MONOCHROME camera.

See also:

CameraCharacteristics.SENSOR_INFO_COLOR_FILTER_ARRANGEMENT

Constant Value: 6 (0x00000006)

SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_RGB

public static final int SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_RGB

Sensor is not Bayer; output has 3 16-bit values for each pixel, instead of just 1 16-bit value per pixel.

See also:

CameraCharacteristics.SENSOR_INFO_COLOR_FILTER_ARRANGEMENT

Constant Value: 4 (0x00000004)

SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_RGGB

public static final int SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_RGGB

See also:

CameraCharacteristics.SENSOR_INFO_COLOR_FILTER_ARRANGEMENT

Constant Value: 0 (0x00000000)

SENSOR_INFO_TIMESTAMP_SOURCE_REALTIME

public static final int SENSOR_INFO_TIMESTAMP_SOURCE_REALTIME

Timestamps from android.sensor.timestamp are in the same timebase as SystemClock.elapsedRealtimeNanos(), and they can be compared to other timestamps using that base.

When buffers from a REALTIME device are passed directly to a video encoder from the camera, automatic compensation is done to account for differing timebases of the audio and camera subsystems. If the application is receiving buffers and then later sending them to a video encoder or other application where they are compared with audio subsystem timestamps or similar, this compensation is not present. In those cases, applications need to adjust the timestamps themselves. Since SystemClock.elapsedRealtimeNanos() and SystemClock.uptimeMillis() only diverge while the device is asleep, an offset between the two sources can be measured once per active session and applied to timestamps for sufficient accuracy for A/V sync.

See also:

Constant Value: 1 (0x00000001)

SENSOR_INFO_TIMESTAMP_SOURCE_UNKNOWN

public static final int SENSOR_INFO_TIMESTAMP_SOURCE_UNKNOWN

Timestamps from android.sensor.timestamp are in nanoseconds and monotonic, but can not be compared to timestamps from other subsystems (e.g. accelerometer, gyro etc.), or other instances of the same or different camera devices in the same system with accuracy. However, the timestamps are roughly in the same timebase as SystemClock.uptimeMillis(). The accuracy is sufficient for tasks like A/V synchronization for video recording, at least, and the timestamps can be directly used together with timestamps from the audio subsystem for that task.

Timestamps between streams and results for a single camera instance are comparable, and the timestamps for all buffers and the result metadata generated by a single capture are identical.

See also:

Constant Value: 0 (0x00000000)

SENSOR_PIXEL_MODE_DEFAULT

public static final int SENSOR_PIXEL_MODE_DEFAULT

This is the default sensor pixel mode. This is the only sensor pixel mode supported unless a camera device advertises REQUEST_AVAILABLE_CAPABILITIES_ULTRA_HIGH_RESOLUTION_SENSOR.

See also:

CaptureRequest.SENSOR_PIXEL_MODE

Constant Value: 0 (0x00000000)

SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION

public static final int SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION

This sensor pixel mode is offered by devices with capability REQUEST_AVAILABLE_CAPABILITIES_ULTRA_HIGH_RESOLUTION_SENSOR. In this mode, sensors typically do not bin pixels, as a result can offer larger image sizes.

See also:

CaptureRequest.SENSOR_PIXEL_MODE

Constant Value: 1 (0x00000001)

SENSOR_REFERENCE_ILLUMINANT1_CLOUDY_WEATHER

public static final int SENSOR_REFERENCE_ILLUMINANT1_CLOUDY_WEATHER

See also:

CameraCharacteristics.SENSOR_REFERENCE_ILLUMINANT1

Constant Value: 10 (0x0000000a)

SENSOR_REFERENCE_ILLUMINANT1_COOL_WHITE_FLUORESCENT

public static final int SENSOR_REFERENCE_ILLUMINANT1_COOL_WHITE_FLUORESCENT

W 3900 - 4500K

See also:

CameraCharacteristics.SENSOR_REFERENCE_ILLUMINANT1

Constant Value: 14 (0x0000000e)

SENSOR_REFERENCE_ILLUMINANT1_D50

public static final int SENSOR_REFERENCE_ILLUMINANT1_D50

See also:

CameraCharacteristics.SENSOR_REFERENCE_ILLUMINANT1

Constant Value: 23 (0x00000017)

SENSOR_REFERENCE_ILLUMINANT1_D55

public static final int SENSOR_REFERENCE_ILLUMINANT1_D55

See also:

CameraCharacteristics.SENSOR_REFERENCE_ILLUMINANT1

Constant Value: 20 (0x00000014)

SENSOR_REFERENCE_ILLUMINANT1_D65

public static final int SENSOR_REFERENCE_ILLUMINANT1_D65

See also:

CameraCharacteristics.SENSOR_REFERENCE_ILLUMINANT1

Constant Value: 21 (0x00000015)

SENSOR_REFERENCE_ILLUMINANT1_D75

public static final int SENSOR_REFERENCE_ILLUMINANT1_D75

See also:

CameraCharacteristics.SENSOR_REFERENCE_ILLUMINANT1

Constant Value: 22 (0x00000016)

SENSOR_REFERENCE_ILLUMINANT1_DAYLIGHT

public static final int SENSOR_REFERENCE_ILLUMINANT1_DAYLIGHT

See also:

CameraCharacteristics.SENSOR_REFERENCE_ILLUMINANT1

Constant Value: 1 (0x00000001)

SENSOR_REFERENCE_ILLUMINANT1_DAYLIGHT_FLUORESCENT

public static final int SENSOR_REFERENCE_ILLUMINANT1_DAYLIGHT_FLUORESCENT

D 5700 - 7100K

See also:

CameraCharacteristics.SENSOR_REFERENCE_ILLUMINANT1

Constant Value: 12 (0x0000000c)

SENSOR_REFERENCE_ILLUMINANT1_DAY_WHITE_FLUORESCENT

public static final int SENSOR_REFERENCE_ILLUMINANT1_DAY_WHITE_FLUORESCENT

N 4600 - 5400K

See also:

CameraCharacteristics.SENSOR_REFERENCE_ILLUMINANT1

Constant Value: 13 (0x0000000d)

SENSOR_REFERENCE_ILLUMINANT1_FINE_WEATHER

public static final int SENSOR_REFERENCE_ILLUMINANT1_FINE_WEATHER

See also:

CameraCharacteristics.SENSOR_REFERENCE_ILLUMINANT1

Constant Value: 9 (0x00000009)

SENSOR_REFERENCE_ILLUMINANT1_FLASH

public static final int SENSOR_REFERENCE_ILLUMINANT1_FLASH

See also:

CameraCharacteristics.SENSOR_REFERENCE_ILLUMINANT1

Constant Value: 4 (0x00000004)

SENSOR_REFERENCE_ILLUMINANT1_FLUORESCENT

public static final int SENSOR_REFERENCE_ILLUMINANT1_FLUORESCENT

See also:

CameraCharacteristics.SENSOR_REFERENCE_ILLUMINANT1

Constant Value: 2 (0x00000002)

SENSOR_REFERENCE_ILLUMINANT1_ISO_STUDIO_TUNGSTEN

public static final int SENSOR_REFERENCE_ILLUMINANT1_ISO_STUDIO_TUNGSTEN

See also:

CameraCharacteristics.SENSOR_REFERENCE_ILLUMINANT1

Constant Value: 24 (0x00000018)

SENSOR_REFERENCE_ILLUMINANT1_SHADE

public static final int SENSOR_REFERENCE_ILLUMINANT1_SHADE

See also:

CameraCharacteristics.SENSOR_REFERENCE_ILLUMINANT1

Constant Value: 11 (0x0000000b)

SENSOR_REFERENCE_ILLUMINANT1_STANDARD_A

public static final int SENSOR_REFERENCE_ILLUMINANT1_STANDARD_A

See also:

CameraCharacteristics.SENSOR_REFERENCE_ILLUMINANT1

Constant Value: 17 (0x00000011)

SENSOR_REFERENCE_ILLUMINANT1_STANDARD_B

public static final int SENSOR_REFERENCE_ILLUMINANT1_STANDARD_B

See also:

CameraCharacteristics.SENSOR_REFERENCE_ILLUMINANT1

Constant Value: 18 (0x00000012)

SENSOR_REFERENCE_ILLUMINANT1_STANDARD_C

public static final int SENSOR_REFERENCE_ILLUMINANT1_STANDARD_C

See also:

CameraCharacteristics.SENSOR_REFERENCE_ILLUMINANT1

Constant Value: 19 (0x00000013)

SENSOR_REFERENCE_ILLUMINANT1_TUNGSTEN

public static final int SENSOR_REFERENCE_ILLUMINANT1_TUNGSTEN

Incandescent light

See also:

CameraCharacteristics.SENSOR_REFERENCE_ILLUMINANT1

Constant Value: 3 (0x00000003)

SENSOR_REFERENCE_ILLUMINANT1_WHITE_FLUORESCENT

public static final int SENSOR_REFERENCE_ILLUMINANT1_WHITE_FLUORESCENT

WW 3200 - 3700K

See also:

CameraCharacteristics.SENSOR_REFERENCE_ILLUMINANT1

Constant Value: 15 (0x0000000f)

SENSOR_TEST_PATTERN_MODE_COLOR_BARS

public static final int SENSOR_TEST_PATTERN_MODE_COLOR_BARS

All pixel data is replaced with an 8-bar color pattern.

The vertical bars (left-to-right) are as follows:

100% white
yellow
cyan
green
magenta
red
blue
black

In general the image would look like the following:

W Y C G M R B K
 W Y C G M R B K
 W Y C G M R B K
 W Y C G M R B K
 W Y C G M R B K
 . . . . . . . .
 . . . . . . . .
 . . . . . . . .

 (B = Blue, K = Black)

Each bar should take up 1/8 of the sensor pixel array width. When this is not possible, the bar size should be rounded down to the nearest integer and the pattern can repeat on the right side.

Each bar's height must always take up the full sensor pixel array height.

Each pixel in this test pattern must be set to either 0% intensity or 100% intensity.

See also:

CaptureRequest.SENSOR_TEST_PATTERN_MODE

Constant Value: 2 (0x00000002)

SENSOR_TEST_PATTERN_MODE_COLOR_BARS_FADE_TO_GRAY

public static final int SENSOR_TEST_PATTERN_MODE_COLOR_BARS_FADE_TO_GRAY

The test pattern is similar to COLOR_BARS, except that each bar should start at its specified color at the top, and fade to gray at the bottom.

Furthermore each bar is further subdivided into a left and right half. The left half should have a smooth gradient, and the right half should have a quantized gradient.

In particular, the right half's should consist of blocks of the same color for 1/16th active sensor pixel array width.

The least significant bits in the quantized gradient should be copied from the most significant bits of the smooth gradient.

The height of each bar should always be a multiple of 128. When this is not the case, the pattern should repeat at the bottom of the image.

See also:

CaptureRequest.SENSOR_TEST_PATTERN_MODE

Constant Value: 3 (0x00000003)

SENSOR_TEST_PATTERN_MODE_CUSTOM1

public static final int SENSOR_TEST_PATTERN_MODE_CUSTOM1

The first custom test pattern. All custom patterns that are available only on this camera device are at least this numeric value.

All of the custom test patterns will be static (that is the raw image must not vary from frame to frame).

See also:

CaptureRequest.SENSOR_TEST_PATTERN_MODE

Constant Value: 256 (0x00000100)

SENSOR_TEST_PATTERN_MODE_OFF

public static final int SENSOR_TEST_PATTERN_MODE_OFF

No test pattern mode is used, and the camera device returns captures from the image sensor.

This is the default if the key is not set.

See also:

CaptureRequest.SENSOR_TEST_PATTERN_MODE

Constant Value: 0 (0x00000000)

SENSOR_TEST_PATTERN_MODE_PN9

public static final int SENSOR_TEST_PATTERN_MODE_PN9

All pixel data is replaced by a pseudo-random sequence generated from a PN9 512-bit sequence (typically implemented in hardware with a linear feedback shift register).

The generator should be reset at the beginning of each frame, and thus each subsequent raw frame with this test pattern should be exactly the same as the last.

See also:

CaptureRequest.SENSOR_TEST_PATTERN_MODE

Constant Value: 4 (0x00000004)

SENSOR_TEST_PATTERN_MODE_SOLID_COLOR

public static final int SENSOR_TEST_PATTERN_MODE_SOLID_COLOR

Each pixel in [R, G_even, G_odd, B] is replaced by its respective color channel provided in android.sensor.testPatternData.

For example:

android.sensor.testPatternData = [0, 0xFFFFFFFF, 0xFFFFFFFF, 0]

All green pixels are 100% green. All red/blue pixels are black.

android.sensor.testPatternData = [0xFFFFFFFF, 0, 0xFFFFFFFF, 0]

All red pixels are 100% red. Only the odd green pixels are 100% green. All blue pixels are 100% black.

See also:

Constant Value: 1 (0x00000001)

SHADING_MODE_FAST

public static final int SHADING_MODE_FAST

Apply lens shading corrections, without slowing frame rate relative to sensor raw output

See also:

CaptureRequest.SHADING_MODE

Constant Value: 1 (0x00000001)

SHADING_MODE_HIGH_QUALITY

public static final int SHADING_MODE_HIGH_QUALITY

Apply high-quality lens shading correction, at the cost of possibly reduced frame rate.

See also:

CaptureRequest.SHADING_MODE

Constant Value: 2 (0x00000002)

SHADING_MODE_OFF

public static final int SHADING_MODE_OFF

No lens shading correction is applied.

See also:

CaptureRequest.SHADING_MODE

Constant Value: 0 (0x00000000)

STATISTICS_FACE_DETECT_MODE_FULL

public static final int STATISTICS_FACE_DETECT_MODE_FULL

Return all face metadata.

In this mode, face rectangles, scores, landmarks, and face IDs are all valid.

See also:

CaptureRequest.STATISTICS_FACE_DETECT_MODE

Constant Value: 2 (0x00000002)

STATISTICS_FACE_DETECT_MODE_OFF

public static final int STATISTICS_FACE_DETECT_MODE_OFF

Do not include face detection statistics in capture results.

See also:

CaptureRequest.STATISTICS_FACE_DETECT_MODE

Constant Value: 0 (0x00000000)

STATISTICS_FACE_DETECT_MODE_SIMPLE

public static final int STATISTICS_FACE_DETECT_MODE_SIMPLE

Return face rectangle and confidence values only.

See also:

CaptureRequest.STATISTICS_FACE_DETECT_MODE

Constant Value: 1 (0x00000001)

STATISTICS_LENS_SHADING_MAP_MODE_OFF

public static final int STATISTICS_LENS_SHADING_MAP_MODE_OFF

Do not include a lens shading map in the capture result.

See also:

CaptureRequest.STATISTICS_LENS_SHADING_MAP_MODE

Constant Value: 0 (0x00000000)

STATISTICS_LENS_SHADING_MAP_MODE_ON

public static final int STATISTICS_LENS_SHADING_MAP_MODE_ON

Include a lens shading map in the capture result.

See also:

CaptureRequest.STATISTICS_LENS_SHADING_MAP_MODE

Constant Value: 1 (0x00000001)

STATISTICS_OIS_DATA_MODE_OFF

public static final int STATISTICS_OIS_DATA_MODE_OFF

Do not include OIS data in the capture result.

See also:

CaptureRequest.STATISTICS_OIS_DATA_MODE

Constant Value: 0 (0x00000000)

STATISTICS_OIS_DATA_MODE_ON

public static final int STATISTICS_OIS_DATA_MODE_ON

Include OIS data in the capture result.

android.statistics.oisSamples provides OIS sample data in the output result metadata.

See also:

Constant Value: 1 (0x00000001)

STATISTICS_SCENE_FLICKER_50HZ

public static final int STATISTICS_SCENE_FLICKER_50HZ

The camera device detects illumination flickering at 50Hz in the current scene.

See also:

CaptureResult.STATISTICS_SCENE_FLICKER

Constant Value: 1 (0x00000001)

STATISTICS_SCENE_FLICKER_60HZ

public static final int STATISTICS_SCENE_FLICKER_60HZ

The camera device detects illumination flickering at 60Hz in the current scene.

See also:

CaptureResult.STATISTICS_SCENE_FLICKER

Constant Value: 2 (0x00000002)

STATISTICS_SCENE_FLICKER_NONE

public static final int STATISTICS_SCENE_FLICKER_NONE

The camera device does not detect any flickering illumination in the current scene.

See also:

CaptureResult.STATISTICS_SCENE_FLICKER

Constant Value: 0 (0x00000000)

SYNC_MAX_LATENCY_PER_FRAME_CONTROL

public static final int SYNC_MAX_LATENCY_PER_FRAME_CONTROL

Every frame has the requests immediately applied.

Changing controls over multiple requests one after another will produce results that have those controls applied atomically each frame.

All FULL capability devices will have this as their maxLatency.

See also:

CameraCharacteristics.SYNC_MAX_LATENCY

Constant Value: 0 (0x00000000)

SYNC_MAX_LATENCY_UNKNOWN

public static final int SYNC_MAX_LATENCY_UNKNOWN

Each new frame has some subset (potentially the entire set) of the past requests applied to the camera settings.

By submitting a series of identical requests, the camera device will eventually have the camera settings applied, but it is unknown when that exact point will be.

All LEGACY capability devices will have this as their maxLatency.

See also:

CameraCharacteristics.SYNC_MAX_LATENCY

Constant Value: -1 (0xffffffff)

TONEMAP_MODE_CONTRAST_CURVE

public static final int TONEMAP_MODE_CONTRAST_CURVE

Use the tone mapping curve specified in the android.tonemap.curve* entries.

All color enhancement and tonemapping must be disabled, except for applying the tonemapping curve specified by android.tonemap.curve.

Must not slow down frame rate relative to raw sensor output.

See also:

Constant Value: 0 (0x00000000)

TONEMAP_MODE_FAST

public static final int TONEMAP_MODE_FAST

Advanced gamma mapping and color enhancement may be applied, without reducing frame rate compared to raw sensor output.

See also:

CaptureRequest.TONEMAP_MODE

Constant Value: 1 (0x00000001)

TONEMAP_MODE_GAMMA_VALUE

public static final int TONEMAP_MODE_GAMMA_VALUE

Use the gamma value specified in android.tonemap.gamma to peform tonemapping.

All color enhancement and tonemapping must be disabled, except for applying the tonemapping curve specified by android.tonemap.gamma.

Must not slow down frame rate relative to raw sensor output.

See also:

Constant Value: 3 (0x00000003)

TONEMAP_MODE_HIGH_QUALITY

public static final int TONEMAP_MODE_HIGH_QUALITY

High-quality gamma mapping and color enhancement will be applied, at the cost of possibly reduced frame rate compared to raw sensor output.

See also:

CaptureRequest.TONEMAP_MODE

Constant Value: 2 (0x00000002)

TONEMAP_MODE_PRESET_CURVE

public static final int TONEMAP_MODE_PRESET_CURVE

Use the preset tonemapping curve specified in android.tonemap.presetCurve to peform tonemapping.

All color enhancement and tonemapping must be disabled, except for applying the tonemapping curve specified by android.tonemap.presetCurve.

Must not slow down frame rate relative to raw sensor output.

See also:

Constant Value: 4 (0x00000004)

TONEMAP_PRESET_CURVE_REC709

public static final int TONEMAP_PRESET_CURVE_REC709

Tonemapping curve is defined by ITU-R BT.709

See also:

CaptureRequest.TONEMAP_PRESET_CURVE

Constant Value: 1 (0x00000001)

TONEMAP_PRESET_CURVE_SRGB

public static final int TONEMAP_PRESET_CURVE_SRGB

Tonemapping curve is defined by sRGB

See also:

CaptureRequest.TONEMAP_PRESET_CURVE

Constant Value: 0 (0x00000000)

Public methods

getKeys

public List<TKey> getKeys ()

Returns a list of the keys contained in this map.

The list returned is not modifiable, so any attempts to modify it will throw a UnsupportedOperationException.

All values retrieved by a key from this list with #get are guaranteed to be non-null. Each key is only listed once in the list. The order of the keys is undefined.

Returns
`List<TKey>`	List of the keys contained in this map.